19.11.2026

How well do biodegradable plastics break down in the sea?

Australian long-term study reveals significant differences in degradation
Melanie Prüser
Two test tubes are lying in a pile of white plastic pellets
Plastic pellets as a raw material for various plastic products.

Biodegradable plastics are often considered a possible alternative to conventional materials. But how do they behave when they actually enter the environment? A recent study by Australia's University of Queensland (UQ) shows how differently plastics behave in natural waters – and why "biodegradable" does not mean that a material will disappear quickly and completely.

A plastic labelled as biodegradable breaks down on its own after use, or so a common assumption goes. In reality, biodegradation depends on numerous factors, including temperature, moisture, and the microorganisms present.

Under controlled laboratory conditions, plastics can behave very differently than they do in nature. Researchers at the University of Queensland investigated the extent of these differences over a period of 18 months. They exposed various plastic samples to Australian coastal waters and river estuaries, where fresh water and saltwater mix – both at the water surface and on the bottom. The findings, published in 2026, provide new insights into how certain biodegradable plastics change under real-world environmental conditions.

TL;DR: Biodegradable plastics in the sea

  • An Australian long-term study shows that the plastics PBAT and PLA examined behave very differently in natural waters.
  • Whether a plastic biodegrades depends on its material properties and the respective environmental conditions. Fragmentation does not necessarily mean complete biodegradation.
  • For manufacturers and product developers, it is essential that the material, its application and the intended disposal route are compatible. 

18 Months in water: How differently plastics behave

The study focused on two biodegradable plastics: PBAT (polybutylene adipate terephthalate), a flexible plastic used, for example, in compostable films, and PLA (polylactic acid), which is used in packaging, among other applications. Conventional linear low-density polyethylene (LLDPE) served as a reference material.

The results, published in the journal ACS ES&T Water in 2026, reveal significant differences. Depending on environmental conditions, PBAT lost between 5 and 93 percent of its original mass, while PLA showed only minor mass loss even after 18 months. However, the researchers observed fragmentation in PLA: the material partially broke into smaller pieces, without this providing evidence of complete biodegradation. Conventional LLDPE, by contrast, remained largely unchanged.

The wide range of mass loss observed for PBAT was particularly striking. The researchers recorded the lowest mass loss in marine areas at the bottom of the water, where little or no oxygen was likely available. Significantly higher values occurred under certain conditions in river estuaries, where fresh water and saltwater mix.

Material properties also help explain these differences. In PLA, the splitting of polymer chains by water (hydrolysis) plays an important role, but this process can proceed relatively slowly at low temperatures. In PBAT, enzymes produced by microorganisms can also contribute to degradation. The rate at which these processes occur depends strongly on the respective environmental conditions.

Biodegradable – but under what conditions?

A person wearing blue protective gloves is holding a partially disintegrated plastic sample over several sample dishes.
Plastic sample after prolonged exposure to natural environmental conditions. Copyright: ARC Bioplastics and Biocomposites Centre

Temperature, moisture, oxygen, and microorganisms all influence how quickly and completely a plastic biodegrades. Industrial composting facilities, for example, provide controlled conditions with relatively high temperatures that promote the degradation of certain plastics. Conditions in soils, rivers, or seas, however, can be very different. A material that breaks down in an industrial composting facility therefore does not necessarily degrade at the same rate in the sea.

There is another important distinction: when a plastic breaks into smaller pieces, this does not mean that it has biodegraded. Biodegradation occurs when microorganisms convert the material into simpler substances such as carbon dioxide, water, and biomass. Visible disintegration alone is not sufficient evidence of this process.

Explained: Bio-based, biodegradable or compostable?

  • Bio-based: The plastic is made wholly or partly from renewable raw materials, such as corn starch or sugar cane. However, this does not indicate whether it is biodegradable.
  • Biodegradable: Microorganisms can convert the material into natural metabolic products under suitable conditions. How quickly and completely this happens depends on the material and the environmental conditions.
  • Compostable: A material that has undergone the relevant testing meets specified requirements for degradation under certain composting conditions. Certification for industrial composting does not automatically mean that the material will also break down in home compost or natural waters.

What does a "biodegradable" label really mean?

Terms such as "biodegradable" or "compostable" can easily create false expectations if the conditions under which they apply are unclear. This is because the relevant tests and certifications generally refer to specific environments and defined periods. The European standard EN 13432, for example, sets out requirements for packaging suitable for industrial composting. However, such certification says nothing about how the material behaves in natural waters.

For manufacturers and suppliers, this means that environmental claims should be as specific as possible and clearly state the conditions under which a material can biodegrade. Without this information, the impression can quickly arise that a product will break down regardless of its surroundings. This can mislead consumers as well as companies when selecting materials.

Using biodegradable plastics for specific applications rather than as general replacements

For the plastics industry, the findings underline the importance of selecting materials that are suited to their application and intended end-of-life disposal route. For biodegradable plastics, it is therefore important to check whether the conditions required for the demonstrated biodegradation are present in the intended waste management system. One example of an application is certified industrially compostable food waste bags. Whether these may be disposed of in organic waste bins depends on local waste disposal regulations.

Particular caution is needed for products that may enter the environment. The term "biodegradable" alone does not guarantee that a material will break down quickly or completely under such conditions. Manufacturers and product developers should therefore examine the conditions and standards under which biodegradability has been demonstrated. It is also essential to determine whether biodegradation has been verified or whether only mass loss or fragmentation has been observed.

The Australian research shows how differently even individual materials can behave depending on their surroundings. Thus, material selection depends not only on whether a material is biodegradable in principle but also on the conditions under which this property actually comes into effect.

Key Fact

Same plastic, different conditions: In the Australian long-term study, PBAT lost only around 5 percent of its mass in oxygen-poor marine areas at the bottom of the water, compared with up to 93 percent under certain conditions in river estuaries. However, substantial mass loss does not automatically mean complete biodegradation.

KI-generiertes Portrait von Melanie Prüser
The portrait was generated by AI.

Author: Melanie Prüser | K-Mag

Melanie Prüser has been writing for over 6 years about the stories behind innovations, technological developments, and societal challenges across various industries. For K-Mag, she explores sustainable trends, the latest innovations, and future topics along the value chain of the plastics and rubber industry.