Special Features

Interesting facts about plastics and rubber

We come across plastics and rubber everywhere in our daily lives. Discover fascinating stories, surprising facts and interesting background information – from historical developments and well-known products to key figures and innovations in the industry.

Results (423)

  • Researchers develop new wave of electronics

    A newly developed flexible, biodegradable semiconductor developed by Stanford engineers shown on a human hair. (Image: Bao lab) A new polymer-based semiconductor developed by Stanford researchers is as flexible as skin and easily degradable. It could have diverse medical and environmental applications, without adding to the mounting pile of global electronic waste. As electronics become increasingly pervasive in our lives – from smart phones to wearable sensors – so too does the ever rising amount of electronic waste they create. A United Nations Environment Program report found that almost 50 million tons of electronic waste were thrown out in 2017 – more than 20 percent higher than waste in 2015. Troubled by this mounting waste, Stanford engineer Zhenan Bao and her team are rethinking electronics. “In my group, we have been trying to mimic the function of human skin to think about how to develop future electronic devices,” Bao said. She described how skin is stretchable, self-healable and also biodegradable – an attractive list of characteristics for electronics. “We have achieved the first two [flexible and self-healing], so the biodegradability was something we wanted to tackle.” The team created a flexible electronic device that can easily degrade just by adding a weak acid like vinegar. The results were published May 1 in the Proceedings of the American Academy of Sciences. “This is the first example of a semiconductive polymer that can decompose,” said lead author Ting Lei, a postdoctoral fellow working with Bao. In addition to the polymer – essentially a flexible, conductive plastic – the team developed a degradable electronic circuit and a new biodegradable substrate material for mounting the electrical components. This substrate supports the electrical components, flexing and molding to rough and smooth surfaces alike. When the electronic device is no longer needed, the whole thing can biodegrade into nontoxic components. Biodegradable bits The flexible semiconductor can adhere to smooth or rough surfaces and biodegrade to nontoxic products. (Image: Bao lab) Bao, a professor of chemical engineering and materials science and engineering, had previously created a stretchable electrode modeled on human skin. That material could bend and twist in a way that could allow it to interface with the skin or brain, but it couldn’t degrade. That limited its application for implantable devices and – important to Bao – contributed to waste. Bao said that creating a robust material that is both a good electrical conductor and biodegradable was a challenge, considering traditional polymer chemistry. “We have been trying to think how we can achieve both great electronic property but also have the biodegradability,” Bao said. Eventually, the team found that by tweaking the chemical structure of the flexible material it would break apart under mild stressors. “We came up with an idea of making these molecules using a special type of chemical linkage that can retain the ability for the electron to smoothly transport along the molecule,” Bao said. “But also this chemical bond is sensitive to weak acid – even weaker than pure vinegar.” The result was a material that could carry an electronic signal but break down without requiring extreme measures. In addition to the biodegradable polymer, the team developed a new type of electrical component and a substrate material that attaches to the entire electronic component. Electronic components are usually made of gold. But for this device, the researchers crafted components from iron. Bao noted that iron is a very environmentally friendly product and is nontoxic to humans. The researchers created the substrate, which carries the electronic circuit and the polymer, from cellulose. Cellulose is the same substance that makes up paper. But unlike paper, the team altered cellulose fibers so the “paper” is transparent and flexible, while still breaking down easily. The thin film substrate allows the electronics to be worn on the skin or even implanted inside the body. From implants to plants The combination of a biodegradable conductive polymer and substrate makes the electronic device useful in a plethora of settings – from wearable electronics to large-scale environmental surveys with sensor dusts. “We envision these soft patches that are very thin and conformable to the skin that can measure blood pressure, glucose value, sweat content,” Bao said. A person could wear a specifically designed patch for a day or week, then download the data. According to Bao, this short-term use of disposable electronics seems a perfect fit for a degradable, flexible design. And it’s not just for skin surveys: the biodegradable substrate, polymers and iron electrodes make the entire component compatible with insertion into the human body. The polymer breaks down to product concentrations much lower than the published acceptable levels found in drinking water. Although the polymer was found to be biocompatible, Bao said that more studies would need to be done before implants are a regular occurrence. Biodegradable electronics have the potential to go far beyond collecting heart disease and glucose data. These components could be used in places where surveys cover large areas in remote locations. Lei described a research scenario where biodegradable electronics are dropped by airplane over a forest to survey the landscape. “It’s a very large area and very hard for people to spread the sensors,” he said. “Also, if you spread the sensors, it’s very hard to gather them back. You don’t want to contaminate the environment so we need something that can be decomposed.” Instead of plastic littering the forest floor, the sensors would biodegrade away. As the number of electronics increase, biodegradability will become more important. Lei is excited by their advancements and wants to keep improving performance of biodegradable electronics. “We currently have computers and cell phones and we generate millions and billions of cell phones, and it’s hard to decompose,” he said. “We hope we can develop some materials that can be decomposed so there is less waste.” Reference Standford University

    Learn more
  • Life and death of Wallace Hume Carothers, the inventor of nylon and the discoverer of neoprene

    Wallace Hume Carothers (1896-1937). Source: DuPont He would be included in any list of the names of significant polymer chemistry scientists: Wallace Hume Carothers, the discoverer of neoprene and the inventor of nylon. But Wallace he did not see himself in this manner… Wallace Hume Carothers was born in Burlington in the US state of Iowa on 27. April 1896 as the oldest of four children. After he finished school, he qualified as an accountant, but then studied natural sciences (chemistry in particular) from 1915 onwards. Carothers proved to be such an excellent student that he took over teaching his professor’s courses – while still an undergraduate – when the professor became a soldier in the First World War. Carothers obtained his bachelor’s degree in 1920 and his master’s degree at the University of Illinois in 1921. Following a short stint as a lecturer at the University of South Dakota, he returned to the University of Illinois, where he obtained a doctorate in 1924. In 1926, Carothers became a lecturer at Harvard University. He left there only three years later, however, in order to work for DuPont as Research Manager in the development of synthetic materials and plastics. Carothers carried out a number of pioneering developments for the company that are still having an impact today: for example, he and his team discovered neoprene – the first synthetic rubber – in 1930. The next polymer sensation followed five years later, when Carothers experimented with polyester fibres and polyamide and invented nylon – the material that delighted women for a long period of time. Wallace Hume Carothers neither knew what name his fibre was given nor did he experience its triumphal success. The scientist suffered from chronic depression and committed suicide in a hotel room in Philadelphia on 29. April 1937, two days after his 41st birthday. During the interview he had for the job at DuPont, the brilliant scientist had already warned the company that he was afflicted by “a recurring neurotic impairment of my productivity”. Years before he took his own life, he had shown Julian Hill, a member of his staff, a capsule of potassium cyanide, which he carried around with himself attached to a watch chain. Carothers’ melancholically morbid character was obvious for all to see, but no-one seriously believed that he would consider suicide, because he was at the height of his creative powers and personal fame. On 30. April 1936, almost exactly one year before his suicide, Carothers had been appointed a member of the prestigious National Academy of Sciences; no scientist who carried out research for industry had ever received this honour before. Carothers was not the type of person to sit back and enjoy his success, however, particularly in view of the fact that he thought that he was already past his best: he is supposed to have told a friend that synthetic rubber and nylon were enough achievements for one person’s entire life. It is also reported that he was plagued by the fear that he would never have another good idea ever again. Guido Deussing Profil of Wallace Hume Carothers Wallace Hume Carothers at DuPont archiv

    Learn more
  • Paradise under threat

    Topic of the Month Microplastic is contaminating and threatening the Maldives islands Source: istock / Jag_cz Even a remote atoll is being impacted by contamination of the world’s oceans by plastic debris. Students and scientists from the University of Bayreuth in Germany analysed marine debris washed ashore on an island in the Indian Ocean and came to worrying conclusions. The consequences of civilisation and the way our society works nowadays are being felt even where very few people live and where nature – looked at from a distance – appears to be in charge and seems to have created something close to heaven on earth. Like on Vavvaru, for example, one of the islands in the Maldives atoll in the Indian Ocean. The sea washes debris onto the beaches of Vavvaru every day, including plenty of plastic. Between 40 and 1,000 plastic items were found per square metre. And more arrive every day. Scientists from the University of Bayreuth spent time on Vavvaru in order to take a closer look at the consequences of contamination by plastic debris. The conclusions they drew make it clear how irresponsible plastic as a resource is being handled: Hannes K. Imhof et al report that the global distribution of plastic debris has reached alarming dimensions. The debris endangers not only industrialised and highly populated areas but also sparsely populated regions far away from any urban sprawl. The scientists recently published the results of their research in the Marine Pollution Bulletin. Location of the Maldives in the Indian Ocean. Illustration: NASA Their publication was based on a study headed by Professor Christian Laforsch about marine ecology that was carried out on Vavvaru as part of the ‘Molecular Ecology’ master course. This Maldives island is located in the south-west of the Lhaviyani Atoll and has an area of about 31,000 square metres. The few people who live here work in the laboratories of a marine research station. Hannes Imhof explains: “Of the roughly 1,200 Maldives islands, Vavvaru is particularly interesting to the scientific community, because it has a very varied landscape within a small area and the island is only visited by a few tourists and locals. It is out of the question that the plastic debris comes from the island and its residents”. The team of scientists from Bayreuth collected beach debris at a selection of different places on Vavvaru, removed organic material from the plastic particles they found, carried out preliminary sorting and sent the debris to the laboratory in Bayreuth. Lhaviyani Atoll of the Maldives. Source: Wikipedia Spectroscopic analyses there of the polymer debris they found revealed the wide range of different plastics that the sea washed onto the beaches of the island. They included plastic containers, fragments of larger objects, pieces of film, synthetic fibres, plastic pellets, small polystyrene balls or whole sections of polystyrene. Hannes K. Imhof et al. report that the polymer debris that was found most frequently included polyethylene, polypropylene and polystyrene. These plastics are used particularly often for the production of packaging, cosmetics and cleaning agents as well as for insulation materials. A striking finding was that 60 per cent of the plastic debris that was collected was between one and five millimetres in size, which led to the conclusion that the particles were fragments of plastic debris that had already been travelling the world’s oceans for quite a long time. Lena Löschel, a student completing the ‘Molecular Ecology’ master course, summarised her feelings by saying that it was frustrating to see how debris from what we consider to be our civilised society ends up on the Maldives. Call for comprehensive and long-term research concepts Seven students from Bayreuth in Germany sifting sand on the beach of the island of Vavvaru. Only particles bigger than one millimetre are examined subsequently in the laboratory on the island. Photo: Christian Laforsch Christian Laforsch and his team have already been studying the occurrence of plastic debris in Southern German and Upper Italian waters intensively in recent years [link]. The scientists were surprised by how much the quantity and nature of the plastics washed onto the beaches of Vavvaru varied from day to day and from place to place – depending on the shape of the beaches and the constantly changing ocean currents, wind directions and wind strengths. “We examined the plastic debris in different coastal regions of the island. The results confirmed our assumption that it makes little sense and can even be misleading if pollution by plastic debris is only determined at one single location and only at individual times”, says Christian Laforsch. The scientist is convinced: in order to be able to assess the extent and the causes of ocean contamination correctly, what are needed are comprehensive and long-term research concepts as well as modern research technologies. Small plastic particles reach the food chains Examples of microplastic on the beaches of the island of Vavvaru: a red and a blue fragment of polyethylene and polyurethane (A and B); a polyethylene pellet of the kind used as a raw material by the plastics industry (C); a piece of polypropylene film (D); Photos: Hannes Imhof “The results of our research make it clear that global contamination of the world’s oceans by marine litter has reached even the remotest of islands”, says Hannes Imhof. Daily pollution by plastic debris was considerably lower than on the coasts of densely populated regions in Asia – like on some beaches in South Korea or India, for example, where recent studies have shown that more than 1,000 plastic particles were washed ashore per square metre every day. This difference was no reason for complacency, however. The Bayreuth scientist explains: “Our research data for Vavvaru would probably have been even more dramatic, if we had also collected microplastic less than one millimetre in size. Because our research about other areas demonstrates that the number of particles increases substantially as size decreases. It is, however, these small particles in particular that reach the food chains especially easily”. More infomration about the topic ... Focus on microplastics Microplastic in inland waterways - review of European rivers Spotlight on marine litter What remains to be said by way of conclusion Scientists from all over the world are currently working on the collection, evaluation and harmonisation of information about pollution of the world’s oceans by plastic. A huge project. Detailed findings are not available yet. Something is obvious, however: pollution of the environment in general and oceans in particular needs to be stopped. This is only possible by joint action, if every single person assumes responsibility for what he or she does. Anyone who demands a ban on plastic has not understood the situation the world is in, which cannot do without polymer materials. What is vital is sustainable use of plastics: plastic is not waste – it is a valuable raw material that requires energy and resources to be produced and that can be recycled after use to manufacture new materials or to generate energy. Anyone who handles plastics carelessly and fails to stop them reaching the environment is contributing to environmental pollution. Rethinking and sustainable action are what are needed. In addition, perhaps, every now and then to picking up a piece of plastic film or a PET bottle that we see lying around and disposing of it properly. It is a simple thing to do and something that would help considerably to preserve our planet if everyone on earth joined in ... Guido Deussing Reference Hannes K. Imhof et al., Spatial and temporal variation of macro-, meso- and microplastic abundance on a remote coral island of the Maldives , Indian Ocean, Marine Pollution Bulletin (2017), doi: 10.1016/j.marpolbul.2017.01.010. (http://www.sciencedirect.com/science/article/pii/S0025326X17300103)

    Learn more
  • Paint electronic circuits: New hybrid inks for printed, flexible electronics without sintering

    New Hybrid inks allow electronic circuits to be applied to paper directly from a pen. Source: INM Scientists at INM have developed a new type of hybrid inks which allows electronic circuits to be applied to paper directly from a pen. Flexible circuits can be produced inexpensively on foil or paper using printing processes and permit futuristic designs with curved diodes or input elements. This requires printable electronic materials that retain a high level of conductivity during usage in spite of their curved surfaces. Research scientists at INM – Leibniz Institute for New Materials have now developed a new type of hybrid inks which allows electronic circuits to be applied to paper directly from a pen, for example. They are usable after drying without any further processing. To create their hybrid inks, the scientists combined the benefits of polymers and metallic nanoparticles: gold or silver nanoparticles are coated with organic, conductive polymers and are then suspended in mixtures of water and alcohol. “Metal nanoparticles with ligands are already today printed to form electronics circuits,” explains the materials scientist Kraus, adding that the shells mostly had to be removed by a sintering process. While the shells control the arrangement of the nanoparticles, they impede conductivity. He added that this was difficult in the case of carrier materials that are sensitive to temperature such as paper or polymer films since these would be damaged during the sintering process. Kraus summarizes the results of his research, saying, “Our new hybrid inks are conductive in the as-dried state, are mechanically flexible, and do not require sintering”. In their hybrid inks, the organic compounds have three functions: “The compounds serve as ligands, ensuring that the nanoparticles remain suspended in the liquid mixture; any agglomeration of particles would have a negative effect on the printing process. Simultaneously, the organic ligands ensure that the nanoparticles have a good arrangement when drying. Ultimately, the organic compounds act as ´hinges´: if the material is bent, they maintain the electrical conductivity. In a layer of metal particles without the polymer sheath, the electrical conductivity would be quickly lost on bending,” Kraus continues. Due to the combination of both materials, when bent, the electrical conductivity is greater than in a layer that is made purely of conductive polymer or a layer made purely of metal nanoparticles.

    Learn more
  • No "sailor's yarn": Ridding the oceans of plastics by turning the waste into valuable fuel

    James Holm (pictured) and Swaminathan Ramesh, Ph.D., teamed up to develop a mobile reactor (also pictured) to convert waste plastic into fuel. Image: Claudia Rocha Billions of pounds of plastic waste are littering the world's oceans. Now, a Ph.D. organic chemist and a sailboat captain report that they are developing a process to reuse certain plastics, transforming them from worthless trash into a valuable diesel fuel with a small mobile reactor. They envision the technology could someday be implemented globally on land and possibly placed on boats to convert ocean waste plastic into fuel to power the vessels. The researchers will present their results today at the 253rd National Meeting & Exposition of the American Chemical Society (ACS). ACS, the world's largest scientific society, is holding the meeting here through Thursday. It features more than 14,000 presentations on a wide range of science topics. A sailor for 40 years, James E. Holm says he has watched the sea and coastline become more and more polluted. "A few years ago, I was sailing through the Panama Canal, and when I stopped at an island on the Atlantic side, I was stunned by the amount of plastic covering the beach. I thought if I had a chance to do something about it, I should." His partner, Swaminathan Ramesh, Ph.D., was driven by the desire and excitement of searching for a new "killer idea" with the power to change the world. Ramesh took early retirement in 2005 from BASF after 23 years as a research chemist and began looking for new opportunities. Ramesh formed EcoFuel Technologies and coupled his chemical knowledge with Holm's concerns about plastic wastes and ocean pollution. In the meantime, Holm had formed Clean Oceans International, a nonprofit organization. They sought to optimize a technology that can use waste hydrocarbon-based plastics as a feedstock for valuable diesel fuel. Their goal was to rid the world of plastic waste by creating a market for it. For years, Ramesh explains, pyrolysis technologies have been used to break down or depolymerize unwanted polymers, such as plastic wastes, leaving a hydrocarbon-based fuel. But the process usually calls for complex and costly refining steps to make the fuel useable. Ramesh set out to change the game and developed a metallocene catalyst deposited on a porous support material that, coupled with a controlled pyrolysis reaction, yields diesel fuels directly without further refining. It is also cost-effective on a small scale, runs at lower temperatures and is mobile. "The catalyst system also allows us to perform the pyrolysis as a continuous-feed process and shrink the footprint of the whole system," Ramesh says. "We can scale the capacity to handle anywhere from 200 pounds per 10-hour day to 10,000 or more pounds per 10-hour day. Because of its small size, we also can take the technological process to where the plastic wastes are." The whole system can fit in a 20-foot shipping container or on the back of a flat-bed truck, Holm says. The next step, they say, is to show the technology works well and that it can create a useable drop-in diesel fuel. They will soon conduct a demonstration project for the government of the city of Santa Cruz, California. Officials there are interested in implementing the technology to address waste plastics that currently cannot be recycled, as well as to formulate diesel fuel the city can use for its vehicles, Holm adds. "If we can get people around the world to pick this up and use it to shift waste plastics to fuel and make money, we are winning," Holm says. "We can even eliminate plastic waste before it gets to the oceans by creating value for it locally on a global basis." More informationen James Holm and Swaminathan Ramesh, Ph.D., interviewed at the 253th ACS meeting in San Francisco TV report about the new technology transforming plastic waste into fuel

    Learn more
  • Car tyres made from food waste – sounds incredible, but it isn’t

    Source: istock / mevanus Millions of tonnes of egg shells and tomato skins are left over all round the world every year – most of them attributable to industrial processing operations. Up to now, these shells and skins have been disposed of as waste. Scientists from Ohio State University in the USA wondered whether it was not possible to make something better than waste out of these natural materials. The answer is both encouraging and surprising: if the right technology is applied, important fillers based on mineral oil of the kind that are used in the production of car tyres can be substituted with promising results by materials made from egg shells and tomato skins. Researchers have developed a patent-pending technology for incorporating food waste into rubber. Here, dried and ground tomato skins (top) and eggshells (bottom) are shown after coarse, medium, and fine processing before being added to rubber. Photo: K. Chamberlain, Ohio State University What we are talking about here is not the use of natural or synthetic rubber for the production of car tyres. This short article focusses entirely on a substance based on mineral oil that is added to the (natural or synthetic) rubber in order to increase the abrasion and ageing resistance of the tyre. Everyone knows that mineral oil is a resource that is only available in finite and therefore limited amounts. It is generally accepted that it is necessary to find an alternative in good time and to replace the fossil resource as soon as possible by a different resource that is, ideally, renewable and/or sustainable. Scientists from Ohio State University think they have identified interesting candidates to assume the role of substitute: In tests carried out by Katrina Cornish and her team, egg shells and tomato skins have proved to be fillers with surprisingly good properties; the results have been better than required by the specifications of industrial standards. Researchers at The Ohio State University have developed a patent-pending technology for incorporating food waste into rubber. Photo by Kenneth Chamberlain, courtesy of The Ohio State University. It is reported that this is probably due to the special nature of the material: in view of their porous microstructures, egg shells have a larger surface area than soot particles, which evidently leads to a better bond between the two materials and, as a result, to unusual tyre properties. Tomato skins, in turn, remained very stable even at high temperatures and could improve the performance of a car tyre substantially when used as an additive. If various parts of soot were replaced by ground egg shells and tomato skins, this would lead to synergy benefits, e.g. rubber that is otherwise abrasion-resistant, tends to be stiff and has unfavourable asphalt gripping properties suddenly becomes more flexible, which improves road grip. Katrina Cornish and her team are still in the early stages of their work. It is becoming apparent, nevertheless, that there are further potential application areas apart from sustainable tyre production. A central design problem still has to be solved first, however: colour. While conventional car tyres are black – due to the use of soot, which is based on mineral oil – the use of egg shells and tomato skins gives them more of a reddish-brown colour. GD

    Learn more
  • What I think of polymers

    Topic of the Month Results of a PlasticsEurope opinion poll about the image of plastic in Germany and around the world Between 9. November and 2. December 2016, PlasticsEurope carried out a representative opinion poll in Germany, with the aim of finding out more about the image of plastic. In March 2017, the association of plastics manufacturers presented the results of the opinion poll. K-online summarises the main points in the Topic of the Month for March. About 1,500 people from different population groups between the ages of 18 and 60 were asked to express their opinions about plastic in face-to-face interviews. Michael Herrmann from PlasticsEurope Germany reports that the aim of the opinion poll was to gain an insight into how plastics are seen and what image polymer materials have. In order to be able to assess the answers appropriately, the people interviewed were divided up into groups. A distinction was made between the general public (GP) between 18 and 60 years old, well-educated young people (YP) between 18 and 30 years old who obtained ‘Abitur’ (university entrance) qualifications and decision-makers (DM) between 31 and 60 years old who obtained ‘Abitur’ (university entrance) qualifications and earned a monthly net income of at least € 4,000. In addition to the questions about plastic materials, an attempt was made to find out what people in Germany are concerned about in general. In response to the question about the most urgent assignments and challenges of our time, more than 60 per cent of the people interviewed in all sectors of the population gave solution of the refugee problem as their answer (multiple answers were allowed). 37 per cent of the general public (GP), 27 per cent of well-educated young people (YP) and 31 per cent of the decision-makers (DM) mentioned maintenance of the social security system. What concerns people Unemployment, earning a living and basic welfare provision are important issues for about one quarter of the people interviewed across the board (16% DM, 22% YP, 26% GP). Approximately one fifth of the people interviewed (20% DM, 17% YP, 20% GP) are concerned about the consequences of terrorism. Environmental and climate protection is important to an average of 15 per cent of the people interviewed, particularly well-educated young people (19%). Economic development is at the bottom end of the scale with figures of ten per cent (DM) and five per cent (YP and GP). One question focussed on the positive or negative things people had heard about plastic. About three quarters of the people interviewed gave neutral answers, i.e. they did not express an opinion about plastic. Ten per cent were exclusively negative, while five per cent said that they had heard or read only positive things about plastic. Seven per cent remembered both positive and negative things. The people interviewed were then asked whether and, if so, in what specific context plastic had been mentioned. Functionality, versatility and cost-effectiveness attributable to plastics were the dominant answers, in addition to the potential plastics offered to save energy and resources. Sustainability and environmental issues, particularly pollution of the world’s oceans by marine litter, were another focus, on the other hand. Marine litter is an issue There were qualitative and quantitative differences in this context. For example: when asked for their general impression, i.e. whether the people interviewed had in general heard anything positive or negative about plastic, only about six to seven per cent of the answers – mainly those given by well-educated young people – spontaneously included marine litter as an issue. If, on the other hand, the people interviewed were specifically asked about marine litter, the picture was completely different. In this context, about 30 per cent of the people interviewed said that they had heard or read about the subject. The comparison reveals that the marine litter issue is evidently attracting less attention as time goes by. When asked who or what was the main cause of marine litter, plastic waste was the most common answer, followed directly by the fact that the focus in society nowadays is on disposability and consumption. The business and industrial communities’ concentration on profit came in third place, followed by the shipping and fishing industries. Only three per cent felt that non-plastic packaging and tourism were to blame. And only two per cent said that it was due to the plastics industry. Benefits of plastics in day-to-day life 65 per cent of the people interviewed said that they were affected primarily by the positive aspects of plastics in their personal day-to-day life. The pros and cons cancelled each other out for an average of 19 per cent of the people interviewed, while 16 per cent mentioned only the negative aspects. There is a definite trend here: the number of people who think the positive aspects of plastics dominate in their day-to-day life has decreased – from about 80 per cent in 2004 to 65 per cent in 2017. 51 per cent of the decision-makers interviewed said that they intended to reduce the use of plastic in their everyday lives (GP 42%). All in all, the use of plastics continues to be considered essential, particularly in the areas of vehicle manufacturing, medicine, IT and electronics, construction and renovation as well as in the kitchen and households in general; the figure for the latter increased slightly between 2015 and 2016. In general and in relation to the above-mentioned applications, plastics packaging is felt to be more questionable, although the people interviewed thought to almost exactly the same extent that it is vital. Plastic and its overall image Overall, plastic has a mainly positive reputation in the sectors of the population interviewed; the differences between the individual groups are just a few percentage points. The plastics industry, the image of which has been improving steadily for a long time now, is, on the other hand, mainly seen in a more positive light by decision-makers (it has a positive image for 79 per cent of them) than is the case with well-educated young people, only 69 per cent of whom give the plastics industry positive marks. The image of practically all areas of industry – with the exception of the automotive industry, the mineral oil industry and the banking industry – with the general public has deteriorated slightly, including the electronics industry – although the latter has the best image of all sectors of industry (1 st place with 86 per cent in 2016) – the electricity industry (2), the chemical industry (3), the pharmaceutical industry (6) and the insurance industry (7). 74 per cent of the people interviewed (2016) see the plastics industry in a very or mainly positive light; the figure in 2015 was 77 per cent. The positive image of the plastics industry is still considerably better than average and puts the sector in 4 th place in the overall ranking list. “Only” 69 per cent (2016) of the well-educated young people interviewed have a positive impression of the plastics industry, on the other hand (71% in 2015). With its image, the plastics industry holds sixth place in the ranking list, behind the electronics industry (1), the electricity industry (2), the chemical industry (3), the automotive industry (4) and the pharmaceutical industry (5). For the decision-makers, the image of the plastics industry is better than average in fourth place behind the electronics industry (1), the electricity industry (2), the chemical industry (3) and the pharmaceutical industry (4). All in all, however, considerably more of the DM (79 per cent in 2016; 80% in 2015) are positive about the plastics industry than is the case in the other groups interviewed. Overall, about 75 per cent of the general public have a very or mainly positive attitude towards both plastic and the plastics industry. What remains to be said by way of conclusion Even the most representative of opinion polls has its weaknesses, as the attempt that is made here is to draw conclusions for what is in general a very much larger total number of people from a random sample of varying size. Nevertheless, a representative opinion poll is definitely able to reflect reality effectively with a small amount of information. Michael Herrmann from PlasticsEurope Germany reports that its opinion poll had demonstrated that plastic as a material and the plastics industry itself are maintaining a strong positive image. He feels, however, that the opinion poll also showed that society still has a substantial need for information about plastic and the applications for it. This need now has to be met by taking suitable action using appropriate methods. Two of the most important tools plastics manufacturers have in this context: focussing on the benefits of plastics products and reporting consistently that plastics save considerably more resources while they are being used than are required to manufacture them. GDeussing

    Learn more
  • Pesticides on the fruit bowl? Just touch it with your finger to find out – wearing special rubber gloves ...

    Image: istock / CollinsChin There are good reasons why people wear rubber gloves – when there will be contact with dirt or blood or when corrosive or toxic substances need to be handled. If experienced experts know what kind of a substance they are dealing with or what poison is involved, they are in a position to take suitable protective measures. However, if this information is not available, well, then even an expert is in a pretty difficult situation. Scientists from the American Society of Chemistry (ASC) are developing a rubber glove that does more than just protect the hand against unwelcome contacts. With their rubber glove, it is even possible to analyse what kind of a substance is involved that one is coming into contact with [1]. The chemists call their invention “Lab-on-a-glove“, a name that is based on analytical systems involving microchips (lab-on-a-chip technology). In the case of the latter, the substance that needs to be examined is applied to a specially structured printed circuit board; in the case of the lab-on-a-glove technology, one simply touches the unknown substance with one’s thumb. Like the lab-on-a-chip technology, the analytical glove has structures that enable it to obtain chemical substances and analyse them. The special feature is, however: the use of rubber gloves as the laboratory platform quite literally requires extremely flexible laboratory facilities. Laboratory facilities in this context mean the areas in which specimen liquid is obtained and analysed. For this purpose, the ACS scientists invented a stretchable ink that they applied to the thumb and index finger of the rubber glove using the 3D printing process. The purpose of the fingertip area of the thumb is to obtain the specimen of the suspicious substance. Three parallel wavy lines were in turn applied to the index finger by the 3D printing process using the special ink. The wavy lines end at the bottom of the finger in a ring that is put on the index finger and that is connected via cables to a unit that transmits the readings to a computer or smartphone via Bluetooth. So how does one obtain information about the kind of substance that is involved on the tip of one’s thumb? We know from biochemistry that enzymes only respond specifically to certain substances. This reaction can be measured and displayed. Advantage is taken of this fact in the lab-on-a-glove technology by incorporating the enzymes that specifically react to the substance in question in each individual case in the ink that is applied to the index finger of the rubber glove. The enzymes operate here as what are known as biosensors. The first lab-on-a-glove model was developed to detect organophosphate compounds that are included as active substances in chemical warfare agents (sarin, VX, ...) or are used in agriculture as pesticides. One application area for these analytical rubber gloves could be consumer protection, i.e. to make sure that fruit and vegetables polluted with pesticides are not sold at retail outlets. The mere touch of a finger might be enough ... Guido Deussing Reference Open Access: Rupesh K. Mishra, Lee J. Hubble, Aida Martín, Rajan Kumar, Abbas Barfidokh, Jayoung Kim, Mustafa M. Musameh, Ilias L. Kyratzis, and Joseph Wang, Wearable Flexible and Stretchable Glove Biosensor for On-Site Detection of Organophosphorus Chemical Threats, ACS Sens., Article ASAP, DOI: 10.1021/acssensors.7b00051, Publication Date (Web): March 3, 2017

    Learn more
  • Pioneer and father of polymer research

    Hermann Staudinger (Image: wikipedia) Completed his doctorate at 22, appointed professor at 26, received the Nobel Prize in Chemistry at 72 - an impressive career: Hermann Staudinger, the father of polymer chemistry, was born exactly 136 years ago. He is considered as the „pioneer of polymer research”, “founder of plastics chemistry”, “father of macromolecules”: Hermann Staudinger (23. 3. 1881 – 8. 9. 1965) gave plastics chemisty its theoretical foundations. Although his outstanding career as a scientist – doctorate at 22, professorship at 26 – culminated in the Nobel Prize in Chemistry, Staudinger has remained largely unknown – as a public figure too – and only specialists are familiar with his life and work nowadays. A series here on www.k-online.de aims to rectify this. It portrays Staudinger as a productive and unorthodox thinker, who refused to accept conventional arguments in both his scientific and political activities – until his ideas finally became mainstream convictions. Hermann Staudinger has written a remarkable story. We wish you much pleasure in reading ours about the remarkable scientist ... The life and work of Hermann Staudinger Part 1 – from 1881-1919 The life and work of Hermann Staudinger Part 2 – from 1920-1932 The life and work of Hermann Staudinger Part 3 – from 1933-1945 The life and work of Hermann Staudinger Part 4 – from 1945-1965

    Learn more
  • How cool is this: artistic presentation of rubber

    Image: Goodyear Visual artists need materials to carry out their profession: painters need canvas, while sculptors need wood or stone. Blake McFarland needs rubber – in the form of car tyres, because McFarland is a tyre artist, who makes deceptively genuine sculptures that look real and are so impressive that the US tyre manufacturer Goodyear decided to commission Blake McFarland for a project that is extremely popular in the USA. Goodyear has committed itself to provide active support for college football, which prepares players for a professional American football career. Hundreds of US universities participate in the leagues that are organised highly professionally [1], because they generate large revenues for the colleges. American football is probably the most popular sport of all in the USA irrespective of this. On 2. January this year, the 81st Cotton Bowl Classic was held in the AT&T Stadium in Arlington, Texas, as the grand finale of the college football season. This college football highlight is also known as the Goodyear Cotton Bowl Classic, because it is always sponsored by Goodyear [2]. The Western Michigan Broncos played the Wisconsin Badgers in the final, that attracted great public attention. The Wisconsin Badgers, who were considered the tournament favourites, won the game 24:16 [2]. Image: Goodyear This year, Goodyear as sponsor came up with something very special to congratulate the two teams on reaching the Cotton Bowl Classic. When the company heard about Blake McFarland and his interest in turning rubber into art, it was prompted to take advantage of his skills in a way that was appropriate in the football context: McFarland was commissioned by Goodyear to reproduce the two teams’ mascots using his rubber tyre art [3]. Blake McFarland, who was a professional football player himself, did not need any persuading and set to work. He spent 300 hours cutting 925 metres of rubber profiles from 500 car tyres in order to reproduce the club mascots. In the case of the Western Michigan Broncos, it is a horse – the Western Michigan Bronco [4] – while it is Bucky Badger [5] in the case of the winning team from Wisconsin. The two sculptures were unveiled at a ceremony held on the day of the game, have been presented subsequently at various celebrations and are, finally, going to the two teams’ colleges as a souvenir and a present. What a wonderful idea ... GD References [1] https://en.wikipedia.org/wiki/College_football [2] https://en.wikipedia.org/wiki/2017_Cotton_Bowl_Classic (15.03.2017) [3] Press release (www.goodyear.com/en-US/international?expand=international), (https://en.wikipedia.org/wiki/Goodyear_Tire_and_Rubber_Company)1 [4] https://en.wikipedia.org/wiki/Western_Michigan_Broncos [5] https://en.wikipedia.org/wiki/Bucky_Badger

    Learn more
  • Electronics that stick to the skin

    This is a sandwich of printed circuits and SBS elastomer is just 750 nm thick, for extremely high flexibility and comfort. Credit: Waseda University It can be assumed that the era of thick and heavy watches on our wrists that are crammed with high-tech equipment will soon be over. Pulse and heart rate monitors: instead of being strapped on, such monitors will simply be stuck on the skin in future and will send a host of medically relevant parameters to stationary receivers. Secret services are already delighted about the tremendous new opportunities that are opening up for monitoring and tapping operations. The incredible thing is that you don’t realise that you are “wired” – because you aren’t. The secret is the use of ultrathin conductive polymer films. It is perhaps something of an exaggeration, but there is a danger that what we will be wearing on our skin in the near future is smarter than we are. Because the electronics which we are talking about here and in the development of which scientists all over the world are investing a great deal of time and energy are described as smart. What are involved here are conductive polymers, which can be produced anywhere with the simplest of inkjet printers and with which surfaces can be coated. Fast progress is being made in the development of conductive polymers. Research scientists at Waseda University in Tokyo, Japan, only recently came up with a new process, with which not only ultrathin electrically conductive SBS films (SBS: polystyrene-polybutadiene-polystyrene) can be manufactured with complex circuits and functions but which can also simply be stuck to the skin and be connected to further components easily – without wires and without plugs. The conductive “wiring” is also produced by inkjet printing. It appears that chips and LEDs can be integrated extremely easily - with an adhesive that is located between two polymer layers. The entire sandwich structure is, however, only 750 nanometres thick and is therefore far thinner than a hair! Chemists, polymer scientists, biomechanics and many other scientific disciplines are working hand-in-hand on this development project, in order to get the best out of the polymer material and in order to find applications where such thin and powerful polymer electronics are crucial, so that existing technical limitations can be overcome. It remains to be seen when conductive polymers will establish themselves on a large scale and replace existing conventional technology, e.g. in medicine, healthcare, sport or the industrial environment. Experts are convinced that conductive polymers will establish themselves. The only question is: when? GD Reference Marin Okamoto, Mizuho Kurotobi, Shinji Takeoka, Junki Sugano, Eiji Iwase, Hiroyasu Iwata and Toshinori Fujie, Sandwich fixation of electronic elements using free-standing elastomeric nanosheets for low-temperature device processes, J. Mater. Chem. C, 5 (2017) 1321-1327, DOI: 10.1039/c6tc04469g

    Learn more
  • Guys: remember to put something on

    Carnival is closely associated with hangovers – severe headaches are frequently suffered on Ash Wednesday following the consumption of too much alcohol. Many people also have vague memories of dragging someone they had just met at a pub and hardly knew off to bed and having unprotected sex with them in their intoxicated and thus uninhibited state. Contraception is one issue, but people rely on the pill as far as this is concerned. This contraceptive does not protect either women or men from sexually transmitted diseases, however: using condoms is the only way to protect oneself against AIDS, gonorrhoea, syphilis and hepatitis B or C infections. It is therefore more true during the carnival season than at any other time that only complete fools forget to practice safe sex! The problem: since there have been drugs that can postpone the outbreak of AIDS for many years, infection with the human immunodeficiency virus (HIV) is no longer considered to be a catastrophe by men under 25 years old in particular. They belong to a “carefree generation” that grew up at a time when there already was specific treatment for the AIDS virus and the disease no longer meant a quick death. The percentage of men in the sexually active age group of 16- to 44-year-old single males who never use a condom was 26 per cent in the most recent study and is therefore – fortunately – decreasing. Risk awareness is not the same everywhere, however, as the rising number of new HIV infections demonstrates. The Robert Koch Institute in Berlin has reported that about 3 200 Germans infected themselves with the AIDS virus in 2015, whereas the figure was only 1 443 twelf years ago. This means that about 84.700 people are currently living in Germany who have an HIV infection and are suffering from AIDS, which corresponds to one person in every 959 inhabitants of the country. Although the actual figures are higher and can only be guessed, this is low by international standards – as many as one in every 292 inhabitants of Brazil was HIV-infected in 2007. But anyone who takes the data seriously knows that every single infection is one too many, because it causes individual suffering that it would be better for partners and relatives not to have to share. AIDS organisations have intensified their prevention campaigns in the carnival heartlands in particular in recent years. 10 000 condoms were, for example, distributed during the carnival season in Düsseldorf. The AIDS organisation and the municipal health authorities in Münster created 1 000 carnival condoms printed with the slogan "Stay covered up for a safe carnival". And the Cologne company Condomi marketed its condoms in a pack printed with clowns, with the aim of encouraging carnival fans to use condoms. Other countries have shown what can be done: the health authorities on the Canary Islands, where gonorrhoea and syphilis are twice as common as in the rest of Spain, made 300 000 condoms available free of charge during the carnival season. The Brazilian government is distributing millions of condoms to the country’s inhabitants year after year. And where the carnival is held on the streets there, such as in Salvador da Bahia, condoms are thrown to the spectators rather than sweets ... Where condoms got their name There is dispute about where condoms got their name. One theory attributes the name to a doctor who practiced at the court of the English king Charles II. The doctor is supposed to have been called Condom, Contom or Conton and is said to have recommended to the king that he used sheep’s intestines to avoid infections and pregnancies and apparently produced appropriate sheaths himself, for which he was knighted. However, since there is no historical evidence confirming the existence of a Dr Condom during Charles II’s reign (1660 – 1685), the whole thing may be no more than an amusing anecdote. It is at any rate the case that the product we are talking about was first mentioned in English literature as a “condum” in a poem written in 1706. Another theory attributes the term "condom" to the ancient Persian word "kendü" or "kondü", which developed into the Latin word "condus" (in the accusative: "condom") and meant a "container" – in the historical cultures, what was generally involved here was a sack made from animal intestines for storing plant seeds (!) The only thing that is definite is probably that the word "condom" has nothing to do with the town of Condom, the capital of Armagnac in the Southern French Département Gers, where the word for “condom” is “capote” or simply “préservatif”. Many people go there anyway, as a result of which a small condom museum was opened there in 2005 (Musée du préservatif, 4, Rue de Sénéchal, open from mid-June to mid-September). A brief condom history – a journey through time Condoms do in fact have something “museumish” about them, since their history goes right the way back to ancient Egypt. The prototype of what is now the latex condom was not produced by the US chemist Charles Nelson Goodyear until 1855, when he invented the vulcanisation of rubber with the help of heat and sulphur, making the material resistant as a result. Before this, mankind made do with appendices, urinary and gall bladders from animals or used penis sheaths made of leather, linen and oil-impregnated paper. For cost reasons alone, condoms in these original forms were used on several occasions and were repaired when required. Condoms made from natural intestines still hold a minor niche position on the world market today. BSE is making them a smaller and smaller feature of the market, however, because most of them come from calf or lamb slaughtering operations. Another reason is because they do not provide a barrier against the AIDS virus or germs that cause other diseases, so that they are inferior to latex condoms in this respect too. Latex – plastic provides security Latex is not the condom industry’s final word, however: new developments made from polyethylene, polyurethane and polyisoprene are in some cases even more elastic or thinner, although they are somewhat more expensive too. They are used mainly by people who suffer from allergies. That is not, however, in itself a reason to switch from latex just in case. In most cases, overreactions are not due to the material at all; they are attributable instead to spermicidal substances with which latex condoms are frequently coated. They include nonoxynol-9; the Swiss AIDS organisation makes this spermicide responsible for 90 per cent of all allergic reactions in the genital area. They can be caused by lubricants that contain silicone too. One of the advantages of plastic condoms is that lubricants which contain grease or oil, such as Vaseline, baby oil or body lotion, have no effect on them, whereas they make latex porous. A brief description of condom production Femidom®, the condom for women that premiered in 1992, is made from polyurethane and – a recent addition – from synthetic rubber (nitrile butadiene). It is a well-known fact that women bear most of the responsibility for contraception and this is true not only of the pill but also of the condom. Long ago in ancient Greece, for example, goat’s bladder condoms for the legendary Cretan King Midos were inserted in the vagina rather than being pulled over the penis. During the carnival season it is even possible nowadays to wear condoms on your head – as a condom hat made from 100 per cent polyester – or to wear them as costume and even cover up one’s entire body with it. It goes without saying that not even the biggest of carnival fools would think such hats or costumes have a contraceptive effect or provide protection against AIDS. They do, however, make it very clear that carnival and condom use belong together. Before setting off to celebrate carnival, every fan should make this his motto: it is better to have a condom with me and not need it than to need one and not have any with me ... GDeußing

    Learn more