Special Features

Interesting facts about plastics and rubber

We come across plastics and rubber everywhere in our daily lives. Discover fascinating stories, surprising facts and interesting background information – from historical developments and well-known products to key figures and innovations in the industry.

Results (423)

  • Ballpoint pen inks

    When the term "ballpoint pen" is used, what is generally meant is the writing implement that is probably the one most frequently used internationally. It is made primarily of plastic and consists of more than just the elongated polymer object with a clip to attach it to a chest or jacket pocket. When it is unscrewed, a reservoir - often made from a polymer material too - can be found inside, which acts as a storage container for the ink. Ballpoint pen inks contain at least one coloured metal oxide pigment and, as its main component, resin and organic solvent. The resin, which accounts for about 15 to 45 per cent of the ballpoint pen ink and is there essentially to determine the viscosity of the ink, is normally a blend of phthalate/alkyd, aldehyde and/or ketone resins, i.e. synthetically produced resin or, in other words, chemical substances / plastics. Alkyd resins belong to the polyester group and are produced in the course of condensation polymerisation of a multivalent alcohol like glycerine with dicarboxylic acid.

    Learn more
  • Regulations on extractables & leachables studies for pharmaceutical packaging

    Regulations on extractables & leachables studies for pharmaceutical packaging >EU Pharmacopeia Chapter 3, incl. Supplement 5.1, 5.2 & 5.3 >USP e.g. <381> for elastomers, <661> for polymer characterisation >FDA Guidance for Industry: Container Closure Systems for Packing Human Drugs and Biologics >FDA Guidance for Industry: Metered Dose Inhaler (MDI) and Dry Powder Inhaler (DPI) Drug Products >FDA Guidance for Industry: Nasal Spray and Inhalation Solution, Suspension and Spray Drug Products >EMEA CPMP/QWP/4359/03, Guideline on Immediate Packing Materials >EMEA CPMP/QWP/2845/00, Note for Guidance for Metered Dose Inhalation Products Packing Materials >EMEA CPMP/QWP/158/96, Note for Guidance on Dry Powder Inhaler

    Learn more
  • Regulations on migration studies for food packaging

    Regulations on migration studies for food packaging >FDA Guideline: “Preparation of Premarket Submissions for Food Contact Substances: Chemistry Recommendations” (December 2007) >EU Directive 82/711/EEC (including amendments) >EU Directive 85/572/EEC >EU Directive 2002/72/EC

    Learn more
  • Unassuming pioneer: Nylon toothbrush now 75 years old (1938-2013)

    By Markus Weber and Guido Deussing The first completely synthetic fibre started to spread all over the world from the USA in May 1940, processed into women’s stockings. What we are talking about here is polyhexamethylene adipic acid amide, which is better known as nylon. What many people are not aware of: the innovative new artificial fibre had already completed its baptism by fire long before then. The manufacturer Du Pont launched the pioneering product on the market as early as 24. February 1938 – in the form of a toothbrush with bristles made of nylon. This happened 75 years ago now. A good reason to look back at the first nylon toothbrushes and to draw attention to the lengthy research work that preceded the invention of nylon by the US chemist Wallace Hume Carothers (1896-1937). Nylons – ultrathin stockings made from “coal, water and air” – are what people all over the world immediately associate nowadays with nylon, the first completely synthetic fibre that was developed in the laboratories of the huge chemical company Du Pont de Nemours & Co. in the 1930s. Although nylon stockings are impressively transparent, their dominance of the market nevertheless conceals the fact that a much less spectacular nylon product was launched on the market beforehand: the nylon toothbrush. This product already went on sale on 24. February 1938, a good two years before the highly popular stockings. In these toothbrushes, nylon bristles replaced bristles of natural origin – generally wild boar bristles – (see “A brief history of the toothbrush”), which dry off less effectively and in the moist environment of which bacteria and fungi flourish. Another advantage: using nylon lowered the price of toothbrushes and created a mass market for them as a result. In this form, they were introduced on the US market under the name “Doctor West’s Miracle Tuft Toothbrush”. Although this was genuine progress, demand for them was poor – for several reasons: • First-generation nylon bristles were so hard that there was a danger of them injuring the gums and making them bleed; they were not recommended by dentists for this reason. This did not change until softer nylon became available: Du Post introduced the “Park Avenue Toothbrush” in 1950. • At the time, it was not yet everyday routine to use a toothbrush; dental hygiene did not enjoy particularly high priority. Attitudes only started to change after 1945, thanks – among other things – to the US soldiers returning from the war who spread the word about the need to clean one’s teeth on a daily basis and thus helped nylon toothbrushes to become highly popular. Du Pont is still in the nylon toothbrush business to this day. The standard nylon fibre that was introduced in 1938 is still in the company’s range (“Tynex Classic” toothbrush), but there are plenty of different alternatives to it in the meantime: specially finished bristles, a brush-like surface or antimicrobial additives diversify the cleaning capabilities of the “Tynex” product line (see www2.dupont.com) that Du Pont established in the 1950s. Most of the toothbrush bristles in common use today are made from nylon 612. This material is said to combine “excellent resilience and elasticity with high wet strength”, i.e. ideal properties for the bristles of toothbrushes (source: Evonik Industries, www.vestamid.de). Nylon 610 is used occasionally too, e.g. in the “Herox” toothbrush supplied by Du Post. These modern nylon materials can be traced back to polyamide 66, which was developed by Wallace Hume Carothers in 1935 and was supplemented at almost exactly the same time by polyamide 6 – that was developed by the chemist Paul Schlack (1897–1987) at the Aceta plant operated by I-G. Farben in Berlin-Lichtenberg. In order to understand what these confusing numbers mean, we need to stop here for a short lesson in chemistry – focussing on what is known as condensation polymerisation: • An acid and an alkaline molecule have to be combined in nylon production. Chemists use a two-stage process to make this combination: first of all, the molecules of the two basic substances are amalgamated to from the molecule of an organic salt; the salt is then heated up to more than 260°C in a vacuum. The result is the creation of a new, condensed molecule that contains all the original atoms – with the exception of two hydrogen atoms and one oxygen atom. In other words: water (H20) is split off in condensation polymerisation. What is left is a unit that is called amide; it combines with others of its kind to form the long nylon polymer (“giant molecule”), a chain of about 1,700 atoms. It is, of course, only possible to determine under special microscopes that the nylon macromolecule is one of the biggest high polymers – “giant” in this context means a length of 0.0000021 millimetres ... • Carothers used hexamethylenediamine and adipic acid, which are obtained from benzene and phenol. Since each of the two raw materials has six carbon atoms, the product was called “polyamide 66” (C12H22O2N2, later given the name of nylon). • Schlack experimented with just one raw material, in which – however –both the amine and the acid component were present: he used caprolactam, an amide of aminocaproic acid. The white powder polymerised after Schlack melted it in a thick-walled glass tube and left it overnight in an oven at 230-250°C: the molecule rings opened and joined together to form high-molecular chains by the head-to-tail principle. Since aminocaproic acid has six carbon atoms, the single-component polymer was called “polyamide 6” (C6H11, later given the name of Perlon). • The condensation polymerisation product of 1,6 hexamethylenediamine and 1,12 dodecanoic acid is known as nylon 612 – because of the six carbon atoms in the amine part and the twelve carbon atoms in the acid part. The vision of a completely synthetic fibre – which was just as ambitious as its outcome was uncertain – that Wallace Hume Carothers started to try and implement in 1928 as head of the Du Pont basic research operations in Wilmington/Delaware marked the beginning of the nylon story. Seven years were to pass before the “superpolymer” was found and developed to the stage where products made from it were viable – helped on occasions by chance discoveries. This does not mean that nylon is a product that was developed by accident, however, because the aim of the experimental work was clear right from the start. An initial breakthrough was made as early as 1930: Julian Hill, Carothers’ first assistant, produced a thick syrup in the course of condensation polymerisation tests. When he took the glass stick with which he had been stirring out of the beaker, there were thick threads hanging off it. Instead of breaking or dripping off, these threads congealed as they cooled and allowed themselves to be pulled apart like rubber; when they were released again, they did not retract. Although this unintended by-product of Carothers’ basic research could not be used for industrial purposes, partly because of its low melting point, Carothers and Hill still presented their discovery to the scientific community, because they claimed to have proved that it must be possible to develop viable fibres from purely synthetic materials. Hill’s thread from the Du Pont laboratory was considered to be the first completely synthetic fibre in the world from then on. In the following years, no end of different chemical combinations were tested at the Du Pont laboratory and hundreds of different fibres were manufactured, all of which turned out to be unsatisfactory, however. The work produced results even so, because Carothers created the basis for the polymerisation of chloroprene into neoprene, one of the more common synthetic rubbers (see our Topic of the Month for January 2013) in the context of his ongoing fibre research and developed synthetic musk that was sold to the perfume industry. On 23. April 1934, Carothers’ assistant Donald Coffman, a chemist at Illinois University, finally succeeded in manufacturing a “superpolyamide” that was both rugged and easy to process. The formulation was so expensive, however, that a search for an affordable alternative soon began. On 27. April 1934, Wesley Peterson synthesised a polyamide that was called “polymer 510” because of the five carbon atoms in its ammonia part and the ten carbon atoms in its acid part. Carothers thought that he had reached his objective, but the Du Pont management were not enthusiastic, because the list of ingredients included castor oil. At the time, oil that was made from the tropical castor seed was a cheap product which was only used as a laxative that tasted terrible. The Du Pont strategists were afraid that using castor oil to produce polyamide would increase demand for and thus the market price of castor seeds to such an extent that business with the new synthetic fibre was likely to become unprofitable within a very short time. Carothers’ team was therefore sent back to the laboratory. After further months of systematic experimentation, Gérard Berchet, who was recruited from Colorado University, finally succeeded in producing “polymer 66” from hexamethylenediamine and adipic acid on 28. February 1935. Carothers thought that it did not match the quality of “polymer 5-10” and needed further work done on it. Although it resisted the solvents used in dry cleaning, its melting point of 265°C was rather high and made it difficult to process the material. More than 200 technical experts were subsequently involved in optimisation of “fibre 66” for the melt spinning process. Initially, every individual production operation caused the engineers new problems – and helped them to become increasingly familiar with what they described as a temperamental fibre. Whereas it was only possible to spin it for ten minutes at a time in the early stages, this was already increased to 82 hours by 1937. Once the first batch had finally been produced in-house in the “experimental station” and “fibre 66” had been given the new name of “nylon” (see “How nylon got its name”), Du Pont built a special nylon factory in Seaford/Delaware at a cost of USD 8.5 million. This little town, which had 2,800 inhabitants at the time, then took the bold decision to call itself the “nylon capital of the world” in future. The original patents for nylon, which were granted in 1937, stressed the following characteristics as the special properties of the “new synthetic silk”: it was said to be both stronger and more elastic than natural silk, while it could be stretched to up to 700 per cent of its original dimensions and still return to its former state. The German chemist Hermann Staudinger (1881-1965), the man who developed the macromolecule theory and thus the field of high-polymer chemistry, wrote in 1939: “These nylon fibres demonstrate surprisingly impressive tear strength, elasticity and flex cracking resistance, so that they have better physical properties than natural fibres, wool and silk in this respect. Major technical success has therefore been achieved in this area via the systematic application of a fundamental, scientifically underpinned theory. Entirely new approaches are opening up for fibre production as a result. It is probable that fibres with different and more valuable properties than natural fibres will be manufactured in future on the basis of an in-depth understanding of the structures involved.” The fact that the public immediately accepted nylon, so that there was very strong demand for it, improved the image of plastics in general. In the past, the man on the street had been sceptical about synthetic materials and basically considered them to be a cheap substitute for natural materials. Following the development of nylon, people were willing to acknowledge plastics as materials that were at least as good and often superior to conventional materials due to their advantages. So it is no surprise that worldwide production of polyamide 66 has increased fifty-seven thousand times over since 1938, the year in which the marketing of nylon toothbrushes began – from a modest 45.4 tonnes to 2,600,000 tonnes.

    Learn more
  • A brief history of the toothbrush

    A brief history of the toothbrush Mass production of toothbrushes is an achievement attributable to the development of plastics. It goes without saying that we human beings were already interested in dental hygiene beforehand, however. The practice of cleaning our teeth goes back as far as progressive cultures in ancient times: • Around 5,000 BC, Greeks and Romans used cleaning pastes to remove plaque that was made from such materials as animal hooves, bones and egg shells. Toothpicks made from twigs were also used. Powdered charcoal and tree bark were used to get rid of bad breath. • Around 3,500 BC, the Babylonians used a piece of wood the size of a pencil taken from the branch of a tree to chew on. Chewing caused the fibres at one end to separate and form a kind of brush, as which the stick was then used. Its other, pointed end acted as a toothpick. Similar findings have been made in Egyptian graves from the time around 3,000 BC too. The chewing stick is now considered to be the earliest predecessor of the toothbrush that has been discovered to date. • The first toothbrush with bristles similar to those we are familiar with today was introduced in China around 1500. It had the shape of a brush: coarse bristles taken from the neck of domestic pigs were attached to a handle made of bone or bamboo. This original toothbrush design has not basically changed in any fundamental way to this day. • Europeans were sceptical about the toothbrushes imported from China, because the coarse boar bristles made people’s gums bleed. The soft alternative made from horsehair was not accepted either, however: the French doctor Pierre Fauchard (1678-1761), who is considered to be the father of modern dentistry, talked disparagingly about horsehair toothbrushes – which he described as ineffective because they were much too soft – in his textbook “Le chirurgien dentiste or traité des dents” that appeared in 1728. He recommended rubbing one’s teeth and gums off daily with a natural sponge instead. Toothpicks made, for example, from quills, silver or copper, were preferred in Europe at this time anyway. • Christoph von Hellwig (1633-1721), the town medical officer in Bad Tennstedt/Thuringia, developed a toothbrush around 1700. There is a toothbrush monument in his honour in the town today. • Only the wealthy could afford toothbrushes until the late 18th century. This situation did not change until English manufacturers started to produce them in sizable numbers from cow bones and bristles obtained from cows, pigs and – later on – badgers too. William Addis (1734-1808), a businessman from London, set up the first of these production facilities in 1780. This was preceded by a prison sentence: Addis had been arrested for disturbance of the peace and came to the conclusion while he was forced to spend time behind bars that there must be a better way to clean one’s teeth than with salted rags. So he took an animal bone, drilled holes in it and glued animal bristles in the holes. This invention was to make him rich – and ensure that his three sons had a lucrative business too. When the bacteriological era began in the 19th century, awareness developed that toothbrushes could be a very effective way to spread bacteria. Nothing was to change here, however, until toothbrushes with nylon bristles were introduced in 1938. The latter were smooth and, in addition, were not hollow, so that they did not become waterlogged.

    Learn more
  • Sometimes rigid, sometimes flexible: nylon has many faces

    Depending on its chemical state, nylon can have very different physical properties, so that it seems as if materials of completely different kinds are involved. It is a well-known fact that nylon is used primarily in the textile industry and rope production, because it is elastic and resistant, does not require ironing and is not attacked by moths. In addition to this fibrous form, nylon is available in a rigid form too, however. Its outstanding characteristics here: exceptional hardness and toughness, abrasion resistance (articles that are subject to friction need no lubricants), resistance to wear, heat, chemicals and solvents as well as an ability to absorb impact, noise and vibration. Its tensile and flexural strength (400-600 kg/cm²) is comparable to metals. It is no surprise that the engineering sciences have discovered nylon for their purposes too: in its rigid configuration, nylon is used to manufacture such products as wheels (including gearwheels), gear bearings, screws, wall plugs, parts for household appliances and tools. In its fibrous or flexible configuration, it is used not only for textiles but also for such products as ropes, cables, fishing lines, fishing nets, fibres for carpets and airbags, parachutes, sails, guitar strings, tennis racket strings, medical stitching material and – last but not least – bristles for toothbrushes.

    Learn more
  • How Nylon got its name

    Carothers called his superpolyamide ‘Fibre 66’. The DuPont management felt the name was not promotional enough and set up a naming committee, which came up with almost 400 suggestions. ‘Duparooh’, suggested by Ernest Knight Gladding (1888–1958), head of DuPont’s rayon division, failed to secure a majority. The acronym was taken as a simple joke, as it stood for ‘Du Pont Pulls A Rabbit Out Of the Hat’. ‘Wacara’, in honour of Wallace Carothers, and ‘Delawear’ – a portmanteau of ‘to wear’ and Delaware, the state where Du Pont produced the polyamide fibre – also failed to attract enough supporters. ‘Dusilk’, ‘Rayamide’ and ‘Silkex’ were also rejected. Gladding then suggested ‘Norun’. It sounded good and meant ‘no runs’, although this was not actually true – so the name was discarded again. ‘Norun’ was quickly changed to ‘Nuron’, as ‘nu’ sounds like ‘new’. However, there was a risk of confusion with a nerve tonic (‘Neuron’). Gladding replaced the ‘r’ with an ‘l’ and the ‘u’ first with an ‘i’, then with a ‘y’ – the made-up word ‘Nylon’ was born. A composition that is essentially meaningless to the ear, to which meanings were subsequently ascribed that were supposedly already inherent in the word’s creation. One interpretation is that ‘nylon’ is derived from ‘New York’ and ‘London’, because two chemists are said to have come up with the word on an intercontinental flight from one metropolis to the other. Alternatively, it is claimed that Du Pont chose the name ‘Nylon’ to provoke Japanese industry, which was facing losses in silk exports due to the new synthetic fibre – according to this theory, ‘Nylon’ stands for ‘Now You’ve Lost, Old Nippon’...

    Learn more
  • Fibre-reinforced plastics make orthioses lighter and more flexible

    Orthioses are sometimes too stiff and can lead to pressure sores. The materials that Dr Markus Brzeski produces at his start-up “A+ Composites” are flexible and lighter while being stronger than steel at the same time. At the Institute for Composite Materials that is part of Kaiserslautern Technical University, he has developed a process that is inexpensive and saves material, with which orthioses as well as prostheses can be manufactured in exact compliance with customers’ specifications. Fibre-reinforced plastic is the material he uses in this context. Orthioses increase people’s quality of life considerably. They provide support, relief or stability. They help, for example, in the case of knee or spine misalignments. However, if they do not fit properly, they can, for example, exert pressure and cause skin irritation. Sores can develop as a result. “With our process, we can produce orthioses that only provide strength at the desired places and are lighter into the bargain”, says Markus Brzeski, who is marketing the technology at his start-up A+ Composites, a spin-off from Kaiserslautern Technical University. Markus Brzeski has developed a material-saving process that allows orthoses, but also prostheses, to be manufactured exactly according to customer requirements. A robot takes the plastic layer by layer into the desired shape. Image:Technische Universität Kaiserslautern In the context of his doctoral thesis, the young entrepreneur developed a process with which he produces innovative new reinforced plastics. “We use a thermoplastic that has a similar consistency to viscous honey”, says the engineer. This plastic is combined with carbon fibres. The special composition of the materials is the key factor here, as Brzeski explains with the help of an example: “The basic principle is as if every hair on one’s head is enclosed in honey. Every single fibre is enclosed by plastic in this way.” The plastic has numerous different properties thanks to this material blend: “It is stronger than steel, while being substantially lighter and flexible at the same time”, the engineer says. “It is therefore particularly suitable for making orthioses.” Processing of the plastic can continue as soon as it has cooled down. The team headed by Brzeski uses a robot for this purpose, which gives the plastic the required shape directly, layer by layer. This process is carried out automatically. The intermediate stages that are needed in conventional production processes are eliminated. “A computer program specifies the shape and the required number”, Brzeski continues. “One of the advantages of our technology is that it saves material and thus up to 80 per cent of the costs.” He points out that it is as a result also worthwhile manufacturing products in small quantities. Orthioses for knees, legs or the back can be produced in customised form with this process, for example: back supports that are designed to relieve the spine require less material, for instance. “It provides specific support – only at the points where this is necessary”, the engineer says. “Material is not required at other points. This makes the orthioses more comfortable for the patient to wear. It increases medical effectiveness as well.” The technology is of interest to the automotive or transport industries too, e.g. to produce special parts for vehicle bodies that have to withstand high pressure or temperatures of 200 to 250°C, which are high for plastics. Another advantage is extremely high resistance to chemicals, which makes the material exceptionally durable. The young entrepreneur is presenting the technology on the joint Rhineland-Palatinate stand at Medica in Düsseldorf. The start-up is receiving funding via the EXIST research transfer programme run by the German Ministry of Economics. Apropos... He is presenting the technology on the joint Rhineland-Palatinate stand (Hall 7a, Stand B06) at the Medica medical technology trade fair from 14. to 17. November.

    Learn more
  • Experts who are still at school need your assistance

    Never let it be said again that young people nowadays are good for nothing. Nonsense! Anyone who makes generalisations like this is in danger of losing the most talented of teenagers. Strictly speaking, it is exactly the other way round. In schools everywhere, pupils are keen to be allowed to experience more, to learn more, to do more than the curriculum specifies. Image: PlasticsEurope It is difficult to estimate the extent to which schools today satisfy the requirements of pupils who are inquisitive and eager to learn. The members of the robotics study group at the CJD School in Königswinter are at any rate lucky: Dr Winfried Schmitz, their strong-willed teacher whose doctorate is in nuclear physics, fuels the interest of the boys and girls he teaches in natural sciences – and they are fascinated. They are demonstrating this convincingly at the special show “Plastics shape the future” organised by PlasticsEurope in Hall 6/Stand C40. This is where the technical enthusiasts are presenting their hobby: robotics. The members of the robotics study group at the CJD School stand out from the crowd – partly because of their tremendous interest in the subject but also because of the many successes they have achieved at the national and international levels. Their greatest successes include: 2005 German champion “Dance” 2006 World champion “Rescue” 2007 Runner-up in the European championship (First Lego League) 2008 World champion in the new soccer league (RoboCup Junior) 2009 World champion “Soccer” (RoboCup Junior) 2014 Bronze in the world championships “Rescue”, German champion “Rescue”, runner-up “Soccer” (RoboCup Junior) 2015 German champion “Soccer”, runner-up “Rescue” (RoboCup Junior) 2016 runner-up in the European championship “Rescue” in two age groups, German champion “Soccer” (RoboCup Junior) Pretty impressive, isn’t it! That’s the way it is: when you are really into something, it shows. However: there are limits to how far enthusiasm can take you – and these limits are frequently physical, i.e. material. The robotics study group receives assistance in various forms – from PlasticsEurope, for example. The central association of the German plastics-processing industry has realised: a group of young people who are interested in technology is developing here and it is important to challenge and encourage them, so that they are in a position to increase their know-how and apply it for the good of humankind – even if that sounds a little dramatic. Back now to the limits and how to eliminate them, coupled with a request: THE ROBOTICS STUDY GROUP AT THE CJD SCHOOL NEEDS YOUR HELP Image: Plastics Europe It is not money that is involved here but technological know-how. What is needed is high-tech material for optimisation of robot chassis and gripper arms (with a vacuum system) – ideally material that is carbon-based. (Dimensions of the robots: 22 cm x 22 cm x 22 cm) The aim of the pupils at the school who are in the robotics study group is to develop and build robots that remain stable even when they run into something and to establish contact with companies, in order to initiate an exchange of ideas between the school and its pupils and industry. Dr Winfried Schmitz: “Up to now, robotics at schools has consisted of mechanical engineering, electrical engineering and computer science. We would like to extend this interdisciplinary approach to include material sciences. The transfer of know-how from industry to the school would be extremely helpful here.” Contact This is something that the plastics and rubber industry can be only too keen to promote. So: don’t hesitate – get going. Contact at K 2016 = PlasticsEurope (Hall 6 / Stand C40). E-mail to Dr Winfried Schmitz (wschmitz@cjd-koenigswinter.net), CJD Christophorus-Schule Königswinter. Guido Deußing

    Learn more
  • A strong team backstage the K 2016

    Let’s talk about people. Particularly about those who work behind the scenes at K 2016 to make sure that the world’s biggest trade fair for the plastics and rubber industry really does turn out to be what everyone involved – exhibitors, industry representatives, visitors and, last but not least, Messe Düsseldorf, the organisers themselves – hopes to experience: a mega-highlight that remains a positive memory to one and all long after it is over and creates high expectations for K 2019. After all: when one K ends, the next one begins! Suppose you want to celebrate something with your friends and acquaintances. The motto is: everyone is invited! Although you know from experience roughly how many guests you can expect to come, you don’t know the exact number until afterwards. You want the event to be a satisfying experience for your friends: special attractions, cuisine that has something to offer everyone, no matter what their taste, good entertainment. You want everyone to enjoy the time immensely. Right from the start, i.e. including their journey. In some cases, a trained project manager is in fact needed in order to make the necessary preparations. Imagine now that you are expecting more than 200,000 guests from all over the world, spread over eight days, and that your attractions are industrial production plants weighing thousands of tonnes which are as big as houses in some cases, cover an area of about 180,000 square metres and are in full operation. Although you have enough space available, alterations and modifications still need to be made here and there, so that everything fits in and can work properly. As long as he is there, every visitor is supposed to have the chance to enjoy an incredible experience: every individual should ideally have the opportunity to take a look at all the attractions and find the refreshments he wants and needs- without having to wait in line too long. It goes without saying that the same applies to travel to and from the event. To some extent, this scenario outlines the situation that the K team at Messe Düsseldorf has to face every three years, whenever plans are being made for the most important trade fair in the plastics and rubber industry. The Technicians Peter Segna The K team at Messe Düsseldorf does, it is true, consist of experienced experts, who are accustomed to organising high-tech trade fairs with tremendous success. Even so, professionals like those at Messe Düsseldorf cannot predict the future either. They do, however, know that you always have to reckon with just about anything – particularly anything unpredictable. As genuine professionals do. We would like to hear what some of them have to say here; they stand for the hundreds of people who pull the strings behind the scenes at K. “Strings” is a word that can almost be taken literally, says Peter Segna, technical officer at Messe Düsseldorf, “if you bear in mind the fact that 4,000 electrical connections and kilometres of power cables as well as 1,500 water supply connections are laid for the exhibitors at K alone.” Peter Segna and his team, which consists of numerous technicians, craftsmen and hall managers, are one of the keys to the success of K. One of their assignments is to help the exhibitors to make sure that their stand at the trade fair is erected on time and as required and that all the installation work needed is completed on schedule. Peter Segna and his team fulfil pretty much every request, as long as it is allowed and technically feasible: “We even tear down hall walls, so that machines and equipment can be set up appropriately”, says Peter Segna. And if a contractor who is supposed to build the stand for an exhibitor throws in the towel, he and his staff are willing to investigate the matter and to take over if at all possible, so that the stand is completed with the help of all the people available. The Logistician Werner Arnold Werner Arnold can call on them too. The experienced logistics expert is the member of the K team at Messe Düsseldorf who makes sure that everything keeps moving. With a team of full-time and freelance staff – the latter called on when trade fairs are taking place – Werner Arnold keeps traffic in and around the exhibition site moving. The busy period starts two to three weeks before K 2016 begins. Werner Arnold explains: “Up to 1,000 lorries – everything from 7.5 to 40 tonne vehicles as well as even bigger ones – arrive at the exhibition site every day to deliver material for the trade fair stands and the exhibits, which weigh tonnes”. There would be absolute chaos on the exhibition site without an ingenious traffic management concept, compliance with which is, suitably enough, monitored strictly. Tact is also essential when the many thousands of people who come to the exhibition site not only during the erection and removal phase but also during K 2016 itself have to be guided and controlled. Imagine if the visitors, who generally come to the trade fair in two surges, were guided onto the exhibition site via a single entrance one day, the logistics expert points out. “That would be a complete disaster”, says Werner Arnold. Visitor flows can, however, be controlled and guided smoothly both on the exhibition site and outside it, if this is done systematically and skilfully. Werner Arnold holds talks with the public transport authorities and taxi companies long in advance of a trade fair like K 2016, discussing such issues with them as the number of visitors, busy arrival and departure times, congestion at the entrances etc. “We liaise on how to transport people into the city, to the hotels, to the station and to the airport most effectively”, says Werner Arnold, and adds: very successfully up to now. The logistics specialist does, however, commiserate with those who arrive and/or depart by car during the rush hour in the morning and evening and often end up spending a long time in traffic jams: “It is an unfortunate fact that we from Messe Düsseldorf are not in a position to alter the approach roads, so we recommend that everyone makes use of the public transport system – it is possible to reach the exhibition site directly by rail.” The Communicators Nora Wernick A navigation system is not therefore needed to find one’s way to Messe Düsseldorf. The site, which is about 450,000 square metres in size, can be negotiated without technical equipment of any kind. On arrival, the 19 halls and whatever a visitor specifically wants to see are easy to reach quickly and simply. Numerous info desks and help points are available throughout the exhibition site to provide information and guidance in German and English. “Our staff at the information desks speak many different languages”, says Nora Wernick from the Messe Düsseldorf visitor and entrance management: “No visitor to the trade fair will leave without being understood.” Nora Wernick and her team are not in action during the days of the trade fair alone, keeping a careful eye on the Messe Düsseldorf information network. She co-ordinates everything: in an information emergency, Nora Wernick takes the necessary steps by radio and telephone. She is responsible for making sure that everything goes smoothly, from online ticket reservation to over-the-counter ticket purchase and bug-free data flow. She and her team are the first to find out how many guests really visited K 2016 and to confirm how successful K 2016 has been in figures. Guido Deußing

    Learn more
  • The grand ABC of rubber (part 1)

    Acre The westernmost state of -> Brazil, bordering the Amazon, four times as big as Switzerland with an area of 164,000 square kilometres and an abundance of rubber trees (-> Hevea brasiliensis). Originally Bolivian territory before Brazil started to obtain -> Rubber there at the end of the 19th century and immigrants to all intents and purposes established a separate state within the state (“Republic of Acre”). This triggered armed conflicts with Bolivia that lasted for several years and were ended by the Peace Treaty of Petrópolis that was signed on 17. September 1903, when Acre was finally assigned to Brazil. Sources: Zischka 1936, 148; Jünger 1942, 79 Akron A city on the Ohio and Erie Canal in the US state of Ohio. What was originally a provincial village (1827: 200 inhabitants; today: more than 200,000) developed into the “Rubber Capital of the World” and the main customer for -> Rubber when the rubber manufacturing companies Goodrich, Goodyear, Firestone and General Tire settled there. Firestone, for example, started with twelve employees; fifty years later, the Firestone Tire & Rubber Company employed 72,000 people. Sources: Zischka 1936, 161; Fischer 1938, 27; Klemm 1960, 20 Amazon The longest river in South America; its banks and those of its tributaries have a total length of 60,000 kilometres. The drainage basin of the Amazon is almost twice as big as the Indian sub-continent at almost six million square kilometres. It became the main area for the exploitation of wild rubber once the industrialisation process started to accelerate in Europe and the United States. In 1900, Chapman C. Todd (1848 – 1929), captain of the “USS Wilmington” determined that the river has an average depth of 36 metres between its mouth and the city of -> Iquitos. Ocean steamers can travel about 1,000 miles inland on it; its bed is so wide as far as -> Manaus that it looks like the sea while flowing like a river, which led it to being called “Rio Mar”. In his book “Paradiese des Teufels”, which appeared in 1933, the author Balder Olden (1882 – 1949) drew comparisons to the Congo River in Africa: “The Congo and the Amazon! ... Both of them cut deep into their part of the world along the Equator, both of them are navigable, both of them provide natural access from Europe and its culture to the tropical jungle. Rubber forests grew in the Congo and Brazil, while Europe ate its way into the tranquillity of both the Congo and the Amazon to harvest the rubber and ravaged the indigenous population.” – The name “Amazon” is, incidentally, associated with tribes of militant women known as Amazons, who are supposed to have lived on the Rio Jamunda, a tributary, under their Queen Conori. This, at any rate, is what a report from 1541 and 1542 says that Gaspar de Carvajal (1500 – 1584), a Spanish Dominican monk and Archbishop of Lima, wrote after he had explored the South American continent from Peru as a missionary and follower of Francisco de -> Orellana. Carvajal quotes Orellana as saying: “Que rio mar! I will give it the name ‘River of the Amazons’”. Alexander von Humboldt (1769 - 1859) questioned this report, however, claiming that the writers of the 16th century were “inclined to emphasise the miraculous and had a tendency to glamorise descriptions of the New World on occasions by borrowing from classical antiquity”. By the way: a potential source of the name apart from the legendary Amazons is the Indian word “Amaçunu”, which means “noise of water clouds”. Carvajal reported that there were enormous flood waves which left devastation in their wake and for which the Indians made a “water dragon” responsible. Sources: Carvajal o. J., 267 – 276; Butze 1954, 90, 96, 116 – 121; Fischer 1938, 24; Jünger 1942, 19, 80 and 90; Olden 1933, 99 – 102 and 1977, 139 – 141; Hoppenhaus 2013, 36 Brazil The original home of the rubber tree, the -> Hevea brasiliensis. At the beginning of the 20th century, there was only wild rubber; plantations had not been introduced yet. 50,000 tonnes of the 54,000 tonnes of natural rubber tapped all over the world by -> Seringueiros around 1900 came from Brazil, while the rest came from the Congo area. Brazil quickly lost its rubber monopoly to Great Britain, that grew rubber trees on high-performance plantations in its colonies in tropical Asia, particularly Ceylon and British Malaya. The share of global natural rubber production accounted for by Brazil dropped from 80 per cent to 3 per cent in just a few decades – and it amounts to only 1.2 per cent today. Sources: Zischka 1936, 155 – 156; Hoppenhaus 2013, 37 Buitenzorg The name of the city of Bogor on the Indonesian island of -> Java from 1746 – 1942 (1895: 25,000 inhabitants; today: 950,000). What was at the time the biggest botanical garden in the world (“Kebun Raya Bogor”) was created here as of 1744 under Dutch colonial rule. The first seedlings of the -> Hevea brasiliensis reached Buitenzorg in 1876, where they thrived. Starting in 1910, botanists headed by W. M. van Helten started to increase the yield of rubber trees with the help of grafting techniques. The experiment was successful: Buitenzorg’s eight-year-old trees produced 650 kilos of rubber per hectare, whereas the trees in British Malaya only produced 300 kilos. This was because the latex vessel system underneath the bark of the newly cultivated Hevea was denser than in the tree’s wild form, while the Buitenzorg trees were less demanding where climatic conditions were concerned too and managed with less water. So it is quite appropriate that the literal meaning of the word Buitenzorg is “without a care” or “sans souci” – the French phrase that is sometimes used in English too. Sources: Zischka 1936, 163 and 168; Jünger 1942, 67; Helbig 1949, 261 Buna Synthetic rubber, a polymer made from butadiene as the basic component (isomer). When chemists looked for ways to manufacture rubber synthetically at the beginning of the 20th century, they only had one single raw material at their disposal, although it was a promising one: -> Isoprene, the isomer of natural rubber. The German chemist Fritz Hofmann (1866 – 1956) from Elberfelder Farbenfabriken, previously known as Friedrich Bayer & Co., produced the isoprene synthetically from derivatives of coal tar and converted it into synthetic rubber via heat polymerisation with the application of high pressure. The Imperial Patent Office granted him Patent No. 250 690 for this on 12. September 1909. The science of synthetic rubber developed rapidly above and beyond isoprene, however: Hofmann discovered that isoprene belonged to a wide-ranging family of hydrocarbons known as butadienes. Butadiene is a liquid gas with molecules that tend to bond in chains, i.e. they polymerise easily. The formation of chains can be accelerated by using chemical additives that will be outlined below, as a result of which substances with extremely different physical properties are created, e.g. liquid with an oily character or solid – and the long series of possible end products includes ones with characteristics that are similar to rubber. In contrast to isoprene, butadiene is comparatively inexpensive to produce. Elberfelder Farbenfabriken (Hofmann und Coutelle) made dimethyl butadiene from acetone and aluminium around 1910 and obtained methyl rubber from it by heat polymerisation too. The quality of the methyl rubber was considerably inferior to natural rubber, however, and did not match synthetic rubber made from isoprene either. Since an inferior substitute for rubber did not promise to be a good business proposition, dimethyl butadiene was abandoned in favour of “pure” butadiene. Cheap raw materials that were in plentiful supply in Germany (lime and coal) were available to produce it. The two materials were melted together at about 3,000°C to produce calcium carbide. Acetylene was obtained from carbide and water and was converted into acetaldehyde with the help of mercury salt, sulphuric acid and water. The chemists then applied their skills to turn this intermediate product into aldol by adding sodium hydroxide solution. This viscous substance reacted with hydrogen under pressure in the presence of nickel to form butylene glycol, known as butol for short. This was heated and water was removed from the vapours produced – and what was left was, finally, butadiene gas as the desired end product. The actual research process only started now: the aim was to find out under what conditions butadiene is converted into high-quality rubber. Two of the countless experiments finally produced satisfactory results: • Polymerisation of butadiene with the help of sodium as a catalyst, i.e. as a substance that initiates and/or accelerates polymerisation without changing itself in the process. In other words: all that sodium does in synthesis of rubber is facilitate the process. The synthetic rubber produced in this way was given the name “Buna”, a word formed from the first two letters of “bu-tadiene” and “na-trium” (= sodium). • Polymerisation of butadiene in emulsion, a process that converts butadiene into -> Latex, as nature does, instead of directly into rubber. If butadiene and water are shaken into an emulsion – using ammonium as the emulsion agent – and this is allowed to polymerise by adding hydrogen superoxide as a catalyst, what is produced is synthetic latex that can be processed in exactly the same way as natural latex (-> Latex, -> Vulcanisation). Whichever alternative was chosen, care had to be taken in synthesis of the rubber to make sure that growth of the molecular chains was interrupted before the material became “too solid”, i.e. lost its elasticity. The chemists used what are known as polymerisation stoppers for this purpose. Emulsion polymerisation was preferred in the manufacturing of synthetic rubber on a large industrial scale, initially at the Buna plant in Schkopau near Merseburg from 1937 onwards, whereas sodium rubber was only manufactured in small quantities. Sources: Fischer 1938, 161, 163 and 168 – 169; Jünger 1942, 187 – 195; Kropf 1949, 26, 28 – 29 and 35 – 36 Cahuchu A word used by the Mainas Indians who lived on the Amazon that means “weeping wood” (“cao” = tree, “ochu” = tear), as the French mathematician and world traveller Charles Marie de La Condamine (1701 – 1774) reported after his trip to the Amazon in a memorandum that appeared in 1745 (“Relation abrégée d’un voyage fait dans l’intérieur de l’Amérique méridionale”). What was being referred to was the sap of the rubber tree. La Condamine writes: “If an incision is made in its bark, a milky white sap runs out that slowly darkens and hardens in contact with air”. “Kautschuk”, the German word for -> Rubber, is taken from “cahuchu”. The Austrian author Vicki Baum (1880 – 1960) wrote the novel “Cahuchu – Strom der Tränen” in 1943 and it is still available today. Sources: Jünger 1942, 20 – 23; Klemm 1960, 10 –11 German Congo League An organisation modelled on the British Congo Reform Association, which championed humanitarian reforms in the form of a native-friendly colonial policy following the -> Congo atrocities during the reign of the Belgian King Léopold II (1835 – 1909). The German Congo League was established in Hanover on 31. March 1910. The main initiators were Protestant missionaries and merchants; the Chairman was Karl Vietor (1861 – 1934), the Africa merchant from Bremen. What brought the various interest groups together was a number of competing ethical, religious and economic motives. The main aim of the merchants, for example, was to open up the Congo for trade from German East Africa. The Protestants allied themselves with the British against the Belgian Catholics, while German foreign policy involved the maintenance of some distance from England without alienating the country’s Belgian neighbours. The German Congo League therefore had to align its humanitarian commitment with the “national interests”, which had definite priority. Consideration was taken of Belgium, for instance, to the extent that a public call to join the German Congo League was not made until after the first visit to Berlin by the new King Albert I on 30. May 1910, following the death of Léopold II. The reformers were accused of being half-hearted as a result; it was also alleged that the League had taken too long to get established, since the Belgian government had already approved an initial Congo reform package. The German Congo League did not at any rate have much impact; one year after it was established, it had only 500 members. On 5. December 1913, it was disbanded and made a fresh start as the “German Association for the Protection of Natives”, which then received greater support. Source: Kaiser 1994, 144 – 147 Ebonite The name given to hard rubber (based on the word “ebony”); tough, non-elastic material that was used as a substitute for leather, wood, metal and horn. The level of hardness increases with the temperature and the amount of sulphur that is added to the raw rubber for the purposes of -> Vulcanisation, the inventor of which is considered to be Charles Nelson Goodyear (1800 – 1860), a mechanic and hardware dealer from Philadelphia. Goodyear succeeded in manufacturing ebonite in 1851, while his brother Nelson (1811 – 1857) improved and marketed the process. In 1851, Charles Goodyear presented a room at the Great Exhibition in London in which all the objects, including the furniture, were made from ebonite. Like vulcanisation, ebonite has several different fathers, as Goodyear’s endless patent disputes demonstrate; historians primarily mention the British chemist Thomas Hancock (1786 – 1865) in this context. The first hard rubber plant in the world was established as a subsidiary of the German company Meyer & Poppenhusen, Harburg near Hamburg, in New York in 1853. Technical exploitation of hard rubber on a larger scale then began roughly around the year 1860; it was used mainly to produce telegraph insulators, stick handles and combs. Sources: Fischer 1938, 152; Jünger 1942, 40 – 42; Klemm 1960, 16 Elastomer A polymer that deforms when subjected to external forces (pressure, tension) but returns to its original shape as soon as these forces decrease or stop. The most well-known elastomer is -> Rubber. Its elasticity (physical property) is an expression of the tremendous length of its molecules and their specific arrangement (chemical property), which can be compared to entangled spaghetti. If the entwined macromolecules are pulled apart, they disentangle and arrange themselves in parallel, like a string of pearls; if they are released, they return to their original, entangled configuration (static-dynamic balance). The elasticity increases as the temperature rises. Frost, on the other hand, causes elastomers to solidify like glass, because the molecules become immobile without heat energy from the surroundings. Sources: Hoppenhaus 2013, 36; Wikipedia Ficus elastica A fig plant that is native to South and South-East Asia and is also known as the rubber tree. During the colonial era in the middle of the 19th century, the British and Dutch grew the plant on trial plantations in such places as -> Java, in order to obtain rubber from its sap in an attempt to weaken the Brazilian rubber monopoly. The product was unable to compete with the -> Hevea brasiliensis in either quality or quantity, however, particularly in view of the fact that it takes 25 years until the Ficus elastica can be tapped and it can still only be harvested every three years even then. Source: Jünger 1942, 57 – 58 Rubber The word “rubber” comes from “rub”, because the fact that it can be used to remove pencil marks from paper was one of the first properties that Europeans discovered and appreciated about rubber. The English optician and mechanic Edward Nairne (1726 – 1806) stumbled on this by chance in his London workshop in 1770. In his book “Familiar Introduction to the Theory and Practice of Perspective”, the English chemist Joseph Priestley (1733 – 1804) then drew public attention to the erasing quality of rubber the same year. This explains why rubber was chosen as the name for the material. The fact that the British sometimes use the phrase “Indian rubber” too does not of course have anything to do with current-day India; it refers instead to America – due to the mistaken plan made by Christopher Columbus (1451 – 1506) to reach India by sailing west, in order to avoid the circuitous route around the Cape of Good Hope when sailing east. Rubber is an -> Elastomer that occurs naturally and is a constituent of the sap of the rubber tree (-> Latex). In its solidified form, it is also known as “raw rubber” (-> Plancha, -> Vulcanisation). Before it is vulcanised (-> Vulcanisation), i.e. is made durable with the help of heat and sulphur, there are restrictions on the use of rubber, as the first rubber coats (“Mackintosh”) demonstrated in the 19th century: in hot summers and cold winters, the material turns sticky and/or brittle and crumbly, while it in particular loses the property that was considered magical in ancient Europe: its elasticity. One of the German words for rubber (“Gummi”) has its roots in Ancient Egyptian. In the 17th century, it was a colloquial word used for adhesive. The English term “Gum arabic” is in turn the word used for a medical substance and cosmetic that can be applied internally and externally, while “gum elastic” is a term used for the rubber obtained from liquid latex. Sources: Fischer 1938, 10 and 151; Zischka 1936, 139; Jünger 1942, 23 and 27, 30 – 31; Kropf 1949, 8; Klemm 1960, 12 and 40 Hevea brasiliensis The botanical name for the rubber tree that is native to tropical South America and is not related in any way to the tree colloquially given the same name (-> Ficus elastica) which is a familiar fixture in offices or living rooms. Hevea does not have any thick, fleshy leaves or creeping, aerial roots; in rainforests, it is quite a large, deciduous tree up to 30 metres tall, with vegetation reminiscent of maple or lime trees. The crown of the rubber tree forms glossy, three-fingered leaves, which it sheds completely in the dry season. The three-lobed seed capsules burst open as soon as they are ripe and catapult three gumdrop-sized seeds into the surrounding area. Hevea brasiliensis is found in five million square kilometres of South American territory, from the jungles south of the Amazon to the western slopes of the Peruvian Andes. About three quarters of this area are in Brazil. Since Hevea trees are loners, only about eight of them are found in one hectare of rainforest. The French globetrotter Charles Marie de La Condamine (-> Cahuchu) was the first European to discover the tree, when he travelled from -> Quito to -> Pará in 1743. The French engineer François Fresneau de la Gataudière (1703 – 1770), who met La Condamine (-> Cahuchu) in South America and corresponded with him, penned the first scientific description of the Hevea tree in 1747. There are several hundred plants with sap that contains rubber (-> Latex) around the world, including lianas in Congo. The Hevea brasiliensis is by far the most productive, however, and it provides the highest-quality raw rubber too. For decades now, practically all the natural rubber in the world has therefore been obtained from this single tree, which has been optimised on plantations to increase the yield even more. (-> Buitenzorg). It takes five to ten years to grow Hevea trees before -> Tapping can begin. Plantation rubber can be tapped all year round, whereas the harvesting of wild rubber in the jungle is restricted to the period between May and September due to floods during the rainy season. Sources: Zischka 1936, 142; Fischer 1938, 76 and 128; Helbig 1949, 266 – 267; Jünger 1942, 52, 56, 71, 75 and 78; Klemm 1960, 36; Hoppenhaus 2013, 36 Iquitos Peruvian city (400,000 inhabitants) located on the -> Amazon close to where Peru, Brazil and Ecuador meet, only 400 kilometres from the -> Putumayo. Although it is 3,700 kilometres from the Atlantic mouth of the Amazon, it can still be reached by ocean-going vessels weighing up to 3,000 tonnes (ocean shipping ends here). Iquitos was originally a jungle backwater, but it became the rubber centre of Peru when the rubber boom developed. While it had fewer than 400 inhabitants in 1860, it had grown to more than 4,000 by 1887 and reached 10,000 inhabitants as early as 1900. Poor crop farmers became rich merchants who dealt with amounts their ancestors never even imagined. A luxurious life similar to -> Manaus was not, however, possible in this remote jungle location far away from where big money was based. Although the champagne flowed at exhilarating night-time parties here too, the supply of goods was limited. What became a luxury, i.e. unaffordable, to the Indians were such basic foodstuffs as flour, which cost at least ten times as much here as in Lima, the capital, or in distant Rio. The people who became rich in Iquitos did not run out of money even so – until the provincial governor started to pressurise them by the arbitrary imposition of taxes. Every governor did everything in his power to get rich as quickly as possible, because revolutions were a common occurrence back then, so that it was not unusual for a new official to replace his predecessor from one month to the next. The government in Lima was unable to do much about the abuse of power by the provincial rulers, since they had hardly any influence from such a long distance away. Because anyone who wanted to reach Iquitos had to struggle through 1,000 kilometres of practically impassable jungle. The only alternative was to make a detour via Panama and Barbados to -> Pará and then to travel the above-mentioned 3,700 kilometres up the Amazon by boat. This meant that Iquitos was further away from Lima than it was from Europe or the United States as far as travelling time was concerned. Due to its peripheral geographical location, Iquitos had very little involvement in Peruvian governmental life too; instead of this, Iquitos leaned more towards -> Brazil, particularly at the economic level. Quite apart from the fact that not much of any benefit could be expected of the government in Lima, because the country’s capital exploited the rubber trade in Iquitos by imposing customs duty amounting to millions that had to be paid to the local customs authority. So anyone who filled his pockets in Iquitos was well advised to get away as soon as possible – which was not as easy as it might sound, because there was no paper money in Iquitos; larger amounts were transported around in wheelbarrows ... When -> Brazil finally lost its rubber monopoly, so that rubber and share prices plummeted, the glamorous life that had been standard in the rubber towns ended almost overnight – the hustle and bustle soon died down in Iquitos too and the tranquillity of the jungle returned. Sources: Fischer 1938, 47, 60 – 62, 114 and 121; Zischka 1936, 146; Jünger 1942, 80 and 90 – 91; Klemm 1960, 24, 26; Olden 1977, 142 Isoprene Unsaturated hydrocarbon gas. Basic component (isomer) of natural rubber; can be obtained synthetically from turpentine and cresol. The chemical formula is: C5H8, a compound in which there is a 5:8 ratio of carbon atoms to hydrogen atoms. Isoprene was discovered in 1860 by the English chemist Charles Greville Williams (1829 – 1910), who obtained it via rubber distillation. Isoprene was identified as the basic component of rubber. However, since it was not identical to rubber, the research scientists had to solve the problem of what exactly the difference was. The hypothesis was developed that rubber consisted of a multiple number of the basic component; in other words, the rubber molecule represented an aggregation of dozens, perhaps thousands, of isoprene molecules to form a macromolecule, in a nutshell: a polymer product of isoprene. What remained to be settled was how many isoprene molecules needed to bond so that the hydrocarbon turned into rubber and how they must be arranged (in a ring, in chains, entangled etc.). In rubber, isoprene has already completed the polymerisation process. This process, which was completed in nature, had to be imitated at the laboratory level in order to verify the macromolecule hypothesis and thus obtain the key to the synthesis of artificial rubber (-> Buna). The assignment was therefore to polymerise isoprene obtained by harvesting rubber trees into rubber, i.e. to convert it back into rubber. The French chemist Gustave Bouchardat (1842 – 1918) had already considered this to be possible, but he had been sneered at by his learned colleagues. In 1879, Bouchardat then produced a rubber-like substance from isoprene and hydrochloric acid. It was, finally, Fritz Hofmann (1866 – 1956), a chemist from Elberfelder Farbenfabriken, who was the first to polymerise isoprene successfully into synthetic rubber, for which he was granted a patent in 1909 (-> Buna). Sources: Zischka 1936, 170 – 173; Fischer 1938, 152 and 155 – 156; Jünger 1942, 185 – 186 and 188; Klemm 1960, 38 Java An Indonesian island that was one of the Dutch Indian colonial territories until 1949 and is about three times as large as its “mother country” at about 127,000 square kilometres. Whereas Java had 50 million inhabitants in 1947, 130 million people live there now, 9,6 million of them in the capital of Jakarta (formerly known as Batavia) alone. The Dutch fleet reached South-East Asia as early as the end of the 16th century via the Cape of Good Hope. Following the establishment of the Dutch East India Company in 1602 and an armistice in the Eighty Years’ War between the Netherlands and Spain, which lasted from 1609 to 1621, overseas trade flourished. The Dutch already endeavoured to enter the rubber business and end -> Brazil’s monopoly in the 19th century before the British tried (-> Wickham). After rather disappointing attempts to produce rubber on Java using the -> Ficus elastica that was native to the island, they equipped an expedition to Peru, which succeeded in buying several hundred rubber trees (-> Hevea brasiliensis), a small proportion of which reached Java in good condition. A plantation was set up with them on -> Buitenzorg, where Hevea grew and flourished. Due to its successful plantation economy, Dutch India was soon considered to be a “model colony”. In the 20th century, rubber even replaced sugar cane as the most important product grown so far. After the First World War, more and more native producers grew Hevea in their own gardens too, processed the -> Latex into raw rubber (“smoked sheets”) themselves and eventually participated in rubber export to the same extent as the colonial rulers. In view of the ongoing strength of the demand experienced from the car and electrical engineering industry, the geographer and Indonesia expert Karl Helbig (1903 – 1991) forecast in 1947 that “rubber farming in Indonesia would be expanding steadily”, due in particular to the fact that the Hevea – optimised in -> Buitenzorg – “appears to grow just as well on any soil and with any amount of rain above a certain minimum”. Indonesia now supplies an impressive 21.7 per cent of global natural rubber production and has only Thailand ahead of it (36,6 per cent). Sources: Jünger 1942, 57 – 58, 61; Helbig 1947, 28 – 32, 71, 73 - 74; Hoppenhaus 2013, 37 Kautschuk natürliches →Elastomer, Bestandteil des Milchsafts des Kautschukbaums (→Latex), in geronnenem Zustand auch als „Rohgummi“ bezeichnet (→Plancha, →Vulkanisation). Cambium The growth area of the tree, separating the bark and bast from the wood of the trunk. It is a tissue of divisible cells that forms bark on the outside and wood on the inside. Any damage done to the cambium does serious damage to the tree as a whole too. The rubber tappers (-> Seringueiros) knew nothing about the cambium – but they knew that the latex yield was greatest when they used their knives to cut right through the bark and then peeled it off in wide strips. Rubber trees that are wounded in this way again and again bleed to death eventually. If the cut made is too shallow, on the other hand, too little latex is obtained. What is involved here is precise work, so that it is not unusual for rubber tappers to be compared with precision mechanics. Sources: Jünger 1940, 69; Helbig 1949, 267; Kropf 1949, 10; Klemm 1960, 23 Congo atrocities In 1900, reports reached European magazines from missionaries operating in the state of Congo, which was still independent and the rubber resources of which the Belgian King Léopold II (1835 – 1909) was having exploited by private companies, about atrocities committed against the natives. There was talk of forced labour, corporal punishment, mutilation and murder. In response, the British government sent their Consul Roger Casement (1864 – 1916), who was personally familiar with the country and its people, to the Congo. His report appeared in 1904 and confirmed the truth of the what had been downplayed as alleged atrocities. It is estimated now that this brutal system of exploitation led to the loss of ten million lives. Europe protested strongly about this, while there was a sense of shame too. The Belgian King was in the international crossfire and was made personally responsible for the violence and killing in Congo (“Leopoldine system”). Public opinion in England was headed by the journalist Edmund Dene Morel (1873 – 1924), who wrote shocking books about the Congo atrocities (main work: “Red Rubber”, London 1906). An English Congo Reform Association was established, which was copied in Germany too (-> German Congo League). All the investigations, debates and appeals produced little in the way of results, however, until Belgium annexed the independent state of Congo as a colony on 15. November 1908, after which it was known as “Belgian Congo”. It was now ruled by the Parliamentary government rather than by the King. The difference between the two regimes was not as large as many reformers had hoped, however. Although excessive violence came to an end, forced labour continued. What international commissions and philanthropic movements had failed to achieve was finally achieved by the triumphant success of plantation rubber in Asia and the price slump on the global rubber market: demand for wild rubber plummeted and Congo’s share of world production dropped from eleven per cent in 1900 to two per cent in 1914. Sources: Fischer 1938, 107 – 110; Jünger 1942, 108 – 109; Klemm 1960, 31 – 32; Olden 1977, 130; Kaiser 1994, 137; Hochschild 2000, 366, 384 – 385 and 390 – 391 Latex The milky sap of the rubber tree (-> Hevea brasiliensis), also known as “rubber milk”, which is composed of the rubber itself (25 to 35 per cent) and water (65 to 75 per cent) and otherwise contains proteins, carbohydrates, salts and fatty acids. What is involved here is, in other words, an emulsion, i.e. the consistent distribution of a substance, here a natural elastomer (-> Isoprene), in a liquid medium. A state of limbo, as it were, in which negatively charged, mutually repellent protein membranes make sure that the rubber substance cannot isolate itself from the liquid. It goes without saying that the rubber tree does not produce latex so that human beings can tap it; the aims are instead to ward off parasites, to act as the tree’s own antibiotic and to heal wounds. Prussic acid has a similar purpose, which is to protect the leaves of the Hevea against insect damage. During -> Tapping, the latex flows into small cups or bowls that are attached to the tree. When they are full, the collection containers are emptied into buckets and are later processed into raw rubber via coagulation. To do this, the wild rubber collectors started a smoky fire, over which they smoked the rubber milk as it rotated on a stick, as a result of which it coagulated immediately. Balls that weighed up to 25 kilograms were formed by the coagulation of more and more layers and were then dried in the sun. The denser this elastic rubber “cake” (-> Plancha) was and the fewer bubbles it contained, the higher the quality and thus the price. In order to increase and standardise quality, the raw rubber manufacturing process was intensified considerably on rubber plantations. Alum, diluted formic or acetic acid, was added to the latex so that it coagulated. The lumps of coagulated latex were then kneaded mechanically and rolled out into sheets. After being smoked for twenty-four hours, the standard product of the rubber plantations was complete – ribbed smoked sheets, one metre long and 30 centimetres wide. The raw rubber was, finally, prepared for export by being packed in plywood crates and was then transported to rubber factories in -> Akron, Birmingham or Hanover. Sources: Zischka 1936, 171; Fischer 1938, 153 – 154; Jünger 1942, 69, 76; Kropf 1949, 10; Klemm 1960, 37 – 38; Hoppenhaus 2013, 37 The grand ABC of rubber (part II) References Butze , Herbert (1954): Im Zwielicht der tropischen Wälder. Landschaft, Mensch und Wirtschaft. Leipzig: F. A. Brockhaus, 446 pages Carvajal , Gaspar de (o. J.): Die Fahrt des Francisco de Orellana über den Amazonas. In: Robert Grün and Evamaria Grün (publishers): Die Eroberung von Peru. Pizarro und andere Conquistadoren 1526-1712. Munich and Zurich: Droemer Knaur (= Knaur-Tb., 4401), pages 235-282 Fischer , Karl (1938): Blutgummi. Roman eines Rohstoffes. Berlin: Kommodore (Killisch-Horn & Co.), 176 pages Helbig , Karl (1947): Indonesiens Tropenwelt. Stuttgart: Franckh, 1 – 5,000, 78 pages Helbig , Karl (1949): Der Kautschukrummel. In: K. H.: Paradies in Licht und Schatten. Erlebtes und Erlauschtes in Inselindien. Braunschweig: Vieweg, pages 260-268 Hochschild , Adam (2000): Schatten über dem Kongo. Die Geschichte eines der großen, fast vergessenen Menschheitsverbrechen. Stuttgart: Klett-Cotta, 2nd edition, 494 pages Hoppenhaus , Kerstin (2013): The rubber apocalypse. Car tyres, operation gloves, pacifiers – to this day, our lives are full of practical things that are produced from the sap of the rubber tree. Because natural rubber has unrivalled elastic properties. However, a microscopically small fungus is threatening world production. In: Die Zeit, No. 45, 31. October, pages 36-37 Jünger , Wolfgang (1942): Kampf um Kautschuk. Leipzig: Wilhelm Goldmann, 4th edition, 241 pages Kaiser , Klaus (1994): “Kongogreuel“. Zur Kongoreformbewegung in England und Deutschland vor dem Ersten Weltkrieg. In: Horst Gründer (publisher): Geschichte & Humanität. Münster and Hamburg: LIT (= Europe – Overseas, 1), 2nd unabridged edition, pages 137 - 149 Klemm , Peter (1960): Blutgummi und Buna. In: P. K.: Entthronte Götter. Geschichten um Rohstoffe. Berlin: Neues Leben, pages 7 - 62 Kropf , Johannes (1949): Vom Blutgummi zum Buna. Halle (Saale): Mitteldeutscher Verlag (= Werner und Peter auf Entdeckungsfahrten, 9), 40 pages Olden , Balder (1977): Paradiese des Teufels. Das Leben Sir Roger Casements. In: B. O.: Paradiese des Teufels. Biographisches und Autobiographisches. Schriften und Briefe aus dem Exil. Berlin: Rütten & Loening, pages 81 - 215 Zischka , Anton (1936): Kautschuk aus Kalk und Kohle gegen “Kautschuk aus Blut“. Der Kampf um den lebenswichtigen Rohstoff der Kraftwagen- und Elektroindustrie. In: A. Z.: Wissenschaft bricht Monopole. Bern, Leipzig und Vienna: Wilhelm Goldmann, pages 139 - 186

    Learn more
  • From "red rubber" to Buna:

    The world war about rubber The bestseller lists compiled by the book publishing industry and the title pages of magazines are currently dominated by the First World War, which began in Europe 100 years ago. What is not mentioned in media coverage is that a different, economic war which also cost millions of people their lives raged around the world long before 1914: a war that was attributable to the industrialised world’s insatiable appetite for rubber and involved brutal exploitation of the indigenous population as rubber collectors in the rainforests around the Amazon and the Congo, ruthless price wars, determined defence of the trade monopoly and never-ending attacks to end it – with Brazil, Great Britain and the USA as the main rivals. Journalists of this era agreed that no other raw material left such a shocking mark on the history of the global economy than rubber and therefore coined the phrase “red rubber” to describe it: the “blood” of trees that were tapped to death and the blood of people who died a painful death were spilled so that rubber could be produced. What is probably the darkest chapter in the history of greed and an obsession with profit at any cost only came to its long overdue end when synthetic rubber was invented as an “antidote to red rubber” (Fischer 1938, 155). All of this has prompted k-online.de to start a series about the events in and background to the “rubber war” entitled “From ‘red rubber’ to Buna”. The series has been based deliberately on contemporary sources with local colour that at the same time provide an insight into ideological patterns which are symptomatic of both left- and right-wing criticism of capitalism. The series is being launched with “The grand ABC of rubber”. It explains the central terminology, highlights an extensive range of the issues and aims to whet your appetite for the content that you can expect in the coming months. It is not merely a review of the past: the series highlights the fact that globalisation and land grabbing are not developments of our time; they are instead a continuation of the colonial age by other means. The primary lesson it teaches is, however, that not rubber in itself but “human beings” [...] were “the cause of the horrors” (Jünger 1942, 197) – and that it is therefore up to us ourselves to make sure that history is not repeated. The grand ABC of rubber

    Learn more