Special Features

Interesting facts about plastics and rubber

We come across plastics and rubber everywhere in our daily lives. Discover fascinating stories, surprising facts and interesting background information – from historical developments and well-known products to key figures and innovations in the industry.

Results (423)

  • Eco-friendly food packaging material based on biopolymere Chitosan

    Image: istock / Nastco Researchers from the National University of Singapore (NUS) have successfully developed an environmentally-friendly food packaging material that is free from chemical additives, by fortifying natural chitosan-based composite film with grapefruit seed extract (GFSE). This novel food packaging material can slow down fungal growth, doubling the shelf-life of perishable food, such as bread. Chitosan, a natural and biodegradable polymer derived from the shells of shrimp and other crustaceans, has immense potential for applications in food technology, owing to its biocompatibility, non-toxicity, short time biodegradability and excellent film forming ability. Chitosan also has inherent antimicrobial and antifungal properties. GFSE, on the other hand, is antioxidant and possesses strong antiseptic, germicidal, anti-bacterial, fungicidal and anti-viral properties. Associate Professor Thian Eng San and PhD student Ms Tan Yi Min from the Department of Mechanical Engineering at NUS Faculty of Engineering spent three years perfecting the formulation to create a novel composite film that not only prevents the growth of fungi and bacteria, but has mechanical strength and flexibility that are comparable to synthetic polyethylene film commonly used for food packaging. The composite film also effectively blocks ultraviolet light, hence slowing down the degradation of food products as a result of oxidation and photochemical deterioration reactions. Laboratory experiments showed that the shelf-life of bread samples packaged with chitosan-based GFSE composite films was two times longer than those packaged using synthetic packaging films. "Increasing attention has been placed on the development of food packaging material with antimicrobial and antifungal properties, in order to improve food safety, extend shelf-life and to minimise the use of chemical preservatives. Consumers are also demanding that packaging materials be formulated from natural materials that are environmentally friendly and biodegradable while improving food preservation. This novel food packaging material that we have developed has the potential to be a useful material in food technology," said Assoc Prof Thian. Elaborating on the benefits of the chitosan-based GFSE composite film, Ms Tan said, "Extending the shelf-life of food products also means reducing food waste, and as a result, reducing the rate of global food loss. This will bring about both environmental and economic benefits." The research received support from the A*STAR Singapore Institute of Manufacturing and Technology (SIMTech) and the Food Innovation & Resource Centre (FIRC). Assoc Prof Thian and Ms Tan will be conducting further studies to improve on this technology. They will look into the degradability of chitosan-based GFSE films, as well as carry out an accelerated shelf life study to examine the extent of microbial growth and quality changes during storage of various food products. There are also plans to explore opportunities to commercialise the novel composite film as a packaging material. Source University of Singapore

    Learn more
  • Plastics made of kitchen waste

    Topic of the Month February 2016 Quality products made out of food production waste: Scientists at the University of Hohenheim extract basic chemicals for chemical industry from chicory root. Photo: istockphoto/hawk111 800,000 tons: That’s how much waste in the form of chicory roots is generated during the production of chicory salad in Europe per year. Currently, after harvesting the chicory salad, the roots are disposed of in composting or biogas plants. Researchers of the University of Hohenheim used these roots to generate Hydroxymethylfurfural (HMF), a basic material in the future plastics industry. A windowless room in the experimental station of the Hohenheim campus. The walls are covered with 3-story shelfs holding numerous tubs lined with pond foil. The tubs contain plastic baskets in which the 15-20 cm long roots are placed upright. Over a period of 3 weeks, these roots grow into chicory buds ready to sell. Nylon stockings and plastic bottles made out of chicory salad waste: Scientists at the University of Hohenheim extract basic chemicals for chemical industry from chicory root (left Dominik Wüst, right Markus Gölz). Photos: University of Hohenheim An aquarium pump waters the plants with a nutrient solution. The room is kept dark so the salad leaves do not lose their yellow pastel shade or develop any of the bitter substances typical for chicory. The commercial production of chicory salad on the basis of water does not look much different – but a lot bigger: The biennial chicory plant only spends the first five months on the fields. In mid-October the leaves are mulched and the roots are harvested, stored in a cool place, and then brought to the growing rooms. Only there will the new buds, the future chicory salad, sprout. But in contrast to the food production, at the University of Hohenheim the focus lies primarily on the non-edible root. “The root makes out approximately 30 % of the plant. The stored carbohydrates are not fully used for the formation of the buds and valuable reserve substances remain. However, the roots can only be used once for chicory growing and have to be thrown away after the buds are harvested”, explains agricultural biologist Dr. Judit Pfenning. Nylon, polyester, perlon, or plastic bottles From the chicory root for nylon stocking: The path is, thanks to research, known as can be produced from a sustainable natural product valuable plastic. In a laboratory of the Institute for Agricultural Engineering a few steps away, Prof. Dr. Andrea Kruse demonstrates just how valuable the root really is. In the background you can see pencil-high stainless steel tube reactors filled with chopped chicory roots and water. After adding diluted acid into the ultra-stable pressure container, it is heated up to a temperature of 200 degrees. Afterwards, the watery product is processed in further steps, which are kept confidential. At the end of this process their research associate Dominik Wüst looks at the result: unpurified hydroxymethylfurfural in the form of yellow-brown crystalline powder. This is one of the 12 basic chemicals which will in the future be used in the plastic industry. It serves as a raw material for nylon, perlon, polyester, or plastic bottles – so-called PEF-bottles, not the PET-bottles. On the wholesale market, it is currently worth 2000 euros per kilo. Chicory-made HMF as part of bioeconomy From chicory root ... So far, such chemicals are obtained from crude oil. The field of bioeconomy is concerned with the question of how they can be produced in a sustainable way. Bioeconomy focusses on plants, animals, or microorganisms as sources for energy instead of fossil raw materials. As part of a previous research project Prof. Dr. Kruse already found a way to extract the basic chemical HMF from fructose. However, she is of the opinion that chicory roots as a source are more elegant. After all: “Fructose is edible. There are better uses for it than extracting HMF.” This is not the case for chicory roots. “Until now, they were waste.” The challenge: storage and quality of the roots ... extract the scientists HMF ... The project poses a challenge: “The root is only of interest for the industry if we can guarantee permanent quality,” explains Prof. Dr. Kruse. To this end, the technical chemist cooperates with the plant scientist Dr. Judit Penning from the Department of General Crop Farming. “In general, the conditions are very good,” explains Penning, “because the consumer who wants to eat the chicory also has very high and consistent quality expectations. That is why only roots of very high quality are transferred from the fields into the commercial growing rooms operating with water-forcing techniques.” Another research aspect: How the roots can be stored without going bad. The problem is that chicory is a seasonal business. However, suppliers of the chemical industry want permanent deliveries in order to be able to constantly use their plants. “This project can only be carried out through interdisciplinary cooperation,” emphasize the scientists. One the one hand the project includes quality control, growing trials, and storage experiments, and on the other hand laboratory experiments and conversion technology. HMF based on chicory is of higher quality than the chemical made of crude oil ... the basis for nylon, polyester, perlon or plastic bottles. Additionally, another aspect makes the project even more likely to be successful: “The chicory root is not only perfectly suited for the production of HMF because it is waste,” says Prof. Dr. Kruse. “It also produces a chemical of higher value than the crude oil-equivalent.” This means that PEF-bottles made out of chicory-HMF could for example be thinner than bottles made out of crude oil-PET. This in turn saves money for transportation and further improves the environmental performance. A part of the great amount of chicory roots is nowadays used for the production of biogas. But this use of the chicory root is economically speaking inferior: “Approximately 220,000 roots per hectare could theoretically amount to 8.14 tons of inulin. Which, according to current research, can be made into 2.87 tons of HMF. Selling this product could make 5.74 million euros. Electricity from biogas produced from this amount of roots would, according to the EEG, only amount to around 21,000 euros.”

    Learn more
  • Microplastics are ruining oysters' sex lives

    While oysters are commonly associated with being an aphrodisiac, apparently our face wash doesn’t reciprocate the feeling. According to a recent study published in the journal Proceedings of the National Academy of Sciences, oysters aren’t getting it on like they used to because of microbeads found in our cosmetics. For two months scientists assessed the impact of polystyrene microspheres (micro-PS) on the physiology of adult Pacific oysters that were exposed to micro-PS during reproduction. Results shows the oysters had 41% fewer offspring, which grew slower than normal. Image: freedigitalphotos/tiverylucky “Oysters were exposed to polystyrene microparticles, which were shown to interfere with energy uptake and allocation, reproduction and offspring performance,” says the study. “A drop in energy allocation played a major role in this reproductive impairment.” Around four to 12 million tons of plastic gets dumped in the ocean annually. Since plastic doesn’t decompose it breaks into millimeter-sized particles called microplastics, which are similar in size to the phytoplankton that oysters typically consume, said the study. However, there is hope for the succulent appetizer staple, I mean, filter-feeding organism. PlasticsToday reported late last year that President Obama has signed into law a bill phasing out the production of all plastic microbeads in soaps, scrubs and other healthcare products by July 1, 2017, and the sale of such beauty products by July 1, 2018. But for now, I guess it's safe to say with Valentine's Day approaching that Marvin Gaye's "Let's Get it On" probably won't make the playlist. (Plastics Today/GD)

    Learn more
  • Recycling is topic on Sesame Street

    Oscar the Grouch and his new digs, complete with recycling center. Source: Sesame Workshop For over four decades, Sesame Street has helped children grow smarter, stronger and kinder by providing preschoolers with the gold-standard in quality educational programming. On January 16th 2016, Sesame Street will launch season 46 of the award-winning show on HBO with the boldest changes to the Street to date, including 30-minute episodes, new preschool-relevant themes, new show open and closing songs, an updated set, a new segment called “Smart Cookies,” and a new cast member, “Nina.” One other important topic is: Oscar’s can has been updated and moved to a more central location so he can add grouchy commentary to any situation. He’ll also be popping up in trash cans, recycling bins and composting receptacles across the street! Some of you (especially those with toddlers) may have heard about the children’s television staple “Sesame Street” moving to cable TV’s HBO from PBS, but that’s not the only shift going on. With the 46th season, which started Jan. 16, the muppet mainstay Oscar the Grouch adds a recycling bin to his standard garbage can home. Actually, the show’s producers, Sesame Workshop, said in a news release describing the new set, both the garbage can and the recycling bin are part of an “updated, reimagined and visually vibrant new set. “Oscar’s can has been updated and moved to a more central location so he can add grouchy commentary to any situation. He’ll also be popping up in trash cans, recycling bins and composting receptacles across the street!” (Check out the start of the first episode, embedded below, for a good idea of Oscar’s new home when he meets Grouch explorer “Mucko Polo,” played by Alan Cumming.) While some commentators have complained that the move to HBO’s Family channel and an updated set betray its gritty roots — typical complaint: “G is for gentrification” — the producers say the changes reflect the New York of today vs. that of the city in 1969 when it began. And recycling is part of that new atmosphere. And for those saying the move to HBO means most kids won’t get a chance to see their favorite characters, the deal between Sesame Workshop and the cable network includes a deal that allows PBS stations to air the new seasons for free nine months after they premiere. Source

    Learn more
  • Self-compacting and now fire-proof, too

    Self-compacting high-performance concrete (SCHPC) has till now suffered from one weakness – when exposed to fire it flakes and splits, which reduces its loadbearing capacity. Empa scientists have now developed a method of manufacturing fire-resistant self-compacting high-performance concrete which maintains its mechanical integrity under these conditions. Wood crackles as it burns in a chimney or campfire. When concrete is exposed to fire it chips and flakes – a process known as spalling. Both effects are due to the same phenomenon: water trapped within the piece of wood or concrete element vaporizes due to the high temperature. As more water vapour is produced the pressure within the wood or concrete structure increases. In wood this causes the cells to burst with a crackling sound, creating cracks in the logs. In concrete structures, chips split away from ceilings, walls, and supporting pillars, reducing their loadbearing capacity and increasing the risk of collapse in a burning building. The resistance of conventional vibrated concrete to the heat of a fire can be optimized by adding a few kilograms of polypropylene (PP) fiber per cubic meter of concrete mixture. When exposed to fire the fibers melt, creating a network of fine canals throughout the concrete structure. These allow the water vapour to escape without increasing the internal pressure, so the concrete structure remains intact. A conflict of interest for concrete users: fire resistance vs self-compacting ability The SAP-containing concrete element resisted temperatures of about 1000 °C, and its capacitance was preserved. The slab made of concrete without SAP showed some severe spalling which reduced the loading capacity of the slab and raised the risk of a collapse. Source: Empa Self-compacting high-performance concrete (SCHPC) behaves differently though. Adding more than 2 kg of PP fiber per cubic meter to the SCHPC mixture affects its ability to self-compact, so the proportion of PP fiber in SCHPC must be kept relatively low. This in turn means that if the concrete is exposed to fire, the network of fine canals created by the melting fibers is not continuous throughout the entire structure, allowing spalling to occur. The $64,000 question is therefore how to make SCHPC fire-resistant, so buildings made of it are safer, whilst keeping the proportion of polymer fibers low enough that the concrete remain self-compacting. Researchers from Empa’s "Concrete / Construction Chemistry" and "Mechanical Systems Engineering" Laboratories have now managed to find an answer. They manufactured a series of thin-walled concrete slabs which were prestressed with cables made of carbon fiber reinforced polymer. The concrete from which the slabs were made also contained 2 kg of PP fiber per cubic meter of mixture. In some slabs the scientists also added a small quantity of super absorbing polymer (SAP), a special synthetic material which is capable of absorbing many times its own weight in water. They then exposed the concrete slabs to fire, reaching temperatures of up to 1000°C. After 90 minutes it became clear that whilst the SAP-containing concrete slabs showed some minor cracking, spalling occurred only in the SAP-free slabs. The explanation for this behaviour is as follows: during the manufacturing process the SAP is saturated with water, swelling to several times its dry volume. As the concrete is setting the water is drawn out of the SAP by capillary action in the porous cement matrix. The SAP shrinks and creates hollow spaces which link the individual, hitherto unconnected networks of PP fibers. The result is a dendritic network of SAP and PP fibers which permeate the entire volume of concrete, allowing it to tolerate the heat of the fire for sufficiently long to maintain the structural integrity of the building. A wide range of possible applications for fire-resistant self-compacting concrete Researchers from Empa tested a SAP-containing concrete slab with a radiant heater. Some discolouring emerged at the surface of the concrete element, but no spalling occurred. (Copyright: courtesy of Prof. Luke Bisby, head of the IEE-BRE fire safety center of The University Edinburgh) With their innovative development the Empa researchers have widened the opportunities for exploiting the economic and environmental advantages offered by self-compacting concrete (SCC). The new process, for which a patent has been applied, allows for instance the use of SCHPC for fire-resistant structures. To date this is only been possible using SCC in combination with a sprinkler extinguishing system or an external thermal insulation layer. But the new SCHPC boasts an additional advantage – the machines used to compact conventional vibrated concrete generate a considerable amount of noise. Construction companies can now keep the noise level down by using SAP enriched self-compacting high-performance concrete instead of vibrated concrete, without any loss of fire resistance. GD

    Learn more
  • PE-based film prevents lithium-ion batteries from overheating

    The thin polyethylene film is embedded with spiky nanoparticles of graphene-coated nickel. (Source: Zheng Chen, Standford University) Researchers at Stanford University have developed the first lithium-ion battery that shuts down before overheating, then restarts immediately when the temperature cools. The new technology could prevent the kind of fires that have prompted recalls and bans on a wide range of battery-powered devices, from recliners and computers to navigation systems and hoverboards. Bunched together, as shown here, nanoparticles of graphene-coated nickel conduct electricity. When the battery overheats, the particles separate and electric current stops flowing. During cooling, the particles reunite and the battery starts producing electricity again. The thin polyethylene film is embedded with spiky nanoparticles of graphene-coated nickel. "People have tried different strategies to solve the problem of accidental fires in lithium-ion batteries," said Zhenan Bao, a professor of chemical engineering at Stanford. "We've designed the first battery that can be shut down and revived over repeated heating and cooling cycles without compromising performance." Bao and her colleagues describe the new battery in a study published in the January 11 issue of the new journal Nature Energy. Bunched together, as shown here, nanoparticles of graphene-coated nickel conduct electricity. When the battery overheats, the particles separate and electric current stops flowing. During cooling, the particles reunite and the battery starts producing electricity again. (Source: Zheng Chen) A typical lithium-ion battery consists of two electrodes and a liquid or gel electrolyte that carries charged particles between them. Puncturing, shorting or overcharging the battery generates heat. If the temperature reaches about 300°F (150°C), the electrolyte could catch fire and trigger an explosion. Several techniques have been used to prevent battery fires, such as adding flame retardants to the electrolyte. In 2014, Stanford engineer Yi Cui created a "smart" battery that provides ample warning before it gets too hot. "Unfortunately, these techniques are irreversible, so the battery is no longer functional after it overheats," said study co-author Cui, an associate professor of materials science and engineering and of photon science. "Clearly, in spite of the many efforts made thus far, battery safety remains an important concern and requires a new approach." To address the problem Cui, Bao and postdoctoral scholar Zheng Chen turned to nanotechnology. Bao recently invented a wearable sensor to monitor human body temperature. The sensor is made of a plastic material embedded with tiny particles of nickel with nanoscale spikes protruding from their surface. For the battery experiment, the researchers coated the spiky nickel particles with graphene, an atom-thick layer of carbon, and embedded the particles in a thin film of low-density polyethylene (LDPE). "We attached the polyethylene film to one of the battery electrodes so that an electric current could flow through it," said Chen, lead author of the study. "To conduct electricity, the spiky particles have to physically touch one another. But during thermal expansion, polyethylene stretches. That causes the particles to spread apart, making the film nonconductive so that electricity can no longer flow through the battery." When the researchers heated the battery above 160°F (70°C), the polyethylene film quickly expanded like a balloon, causing the spiky particles to separate and the battery to shut down. But when the temperature dropped back down to 160°F, the polyethylene shrunk, the particles came back into contact, and the battery started generating electricity again. "We can even tune the temperature higher or lower depending on how many particles we put in or what type of polymer materials we choose," said Bao, who is also a professor, by courtesy, of chemistry and of materials science and engineering. "For example, we might want the battery to shut down at 50°C or 100°C." Resins that may be used include polypropylene, polytetrafluoroethylene (PTFE), and polycarbonate (PC). To test the stability of new material, the researchers repeatedly applied heat to the battery with a hot-air gun. Each time, the battery shut down when it got too hot and quickly resumed operating when the temperature cooled. "Compared with previous approaches, our design provides a reliable, fast, reversible strategy that can achieve both high battery performance and improved safety," Cui said. "This strategy holds great promise for practical battery applications." The research was supported by the SLAC National Accelerator Laboratory and the Precourt Institute for Energy at Stanford. GD Source Stanford University

    Learn more
  • High-performance material polyimide for the first time with angular shape

    Polyimides withstand extreme heat and chemically aggressive solvents, while being considerably less dense than metals. That is why they are very popular in industry, for example as an insulation layer on PCBs or in aerospace applications. However, it is precisely their high stability, which makes polyimides very difficult to process. Neither melting nor etching can be used to bring them into the correct shape. At TU Wien, a new synthesis method has now been developed which opens up completely new possibilities for this material class: it has been possible to produce angular polyimide particles for the first time using a technical trick. Round shapes undesirable Salt crystals under the microscope. Source: TU Wien "Small plastic particles are usually obtained as spherical objects," says Miriam Unterlass from the Institute of Materials Chemistry at TU Wien. However, roundish particles are poorly suited for many applications. "Particle-containing liquids are extensively used as paints and protective coatings," says Unterlass. "The geometric shape of the particles then determines how the particles are arranged and move within the liquid." Many such dispersions do not dry uniformly, because an unfavourable current is produced during evaporation which transports the particles in a particular direction. Clearly, one would prefer paints to dry homogeneously. There have been repeated attempts to give polyimide particles or similar materials an angular shape, but until now there has been little success. Miriam Unterlass’ team at TU Wien has now tried a completely new approach. At first, two different molecules, which usually combine in a rather disorganised manner, are used to produce an angular salt crystal. The salt crystal is formed by conducting the reaction in a gel. The viscous gel slows down the speed of the molecules, which decelerates the reaction, producing well-ordered, high-quality crystals with a diameter of hundreds of micrometres – these are visible to the naked eye. Thermal solid-state polycondensation of single crystals. Source: TU Wien Then comes the crucial step: the crystals are heated, thus producing a further chemical reaction. The salt crystal is converted into polyimide in the solid-state. The salt crystals do not dissolve nor do they melt – it is just the heat that does the trick. Aside, water is created as harmless byproduct. The angular shape of the original salt crystal is retained and an angular polyimide particle lacking any curvature is created. The material withstands almost any solvent and remains stable up to 700 degrees. There are many uses for resistant particles of this kind. They could be combined with other materials to produce protective coatings, or special materials for space travel. Take a look at the details. Click here for the original publication: Konstantin Kriechbaum, D. Alonso Cerrón-Infantes, Berthold Stöger, Miriam M. Unterlass,Shape-Anisotropic Polyimide Particles by Solid-State Polycondensation of Monomer Salt Single Crystals, Macromolecules 48 (2015) 8773–8780 The material for special uses Special view of the crystallization and polycondensation process. Source: TU Wien This research success was made possible due to an unusual combination of very different areas of chemistry: "Gel crystallisation, high-performance materials, solid-state synthesis and crystallography are areas that are rarely combined," says Miriam Unterlass. "It was not easy to bring such different approaches together, but it was definitely worth it in the end." It should be possible to use the same method (production of a salt in gel, which is then heated to convert it into polymer particles which take on the crystal shape) to synthesise other high-performance materials. Further experiments are already under way. Contact Dr. Miriam Unterlass Institut für Materialchemie Technische Universität Wien Getreidemarkt 9, 1060 Wien T: +43-1-58801-165206 miriam.unterlass@tuwien.ac.at

    Learn more
  • Buried in a biologically degradable plastic coffin

    Topic of the Month January 2016 Part three of our series of articles about sustainability focusses on an application area in which successful trials appear to have been completed to replace wood – the dominant material up to now – by plastic or rather a polymer-based, fibre-reinforced composite which biodegrades completely without leaving any residue. Source: istock / stellalevi Funeral rites are as old as humankind itself. Our Stone Age ancestors laid their dead to rest in stone boxes. The Egyptians used basket-like structures made from plaited twigs, before they began to bury the high society in magnificent sarcophagi made from stoneware or clay. It was common practice in the Middle Ages and into the modern era to bury corpses wrapped in cloth and this is a procedure that is still followed nowadays in Islamic countries, for instance. The introduction of coffins At the beginning of the 19 th century, a switch started to be made more and more to keeping the dead in wooden boxes in mortuaries, most of which in Germany and elsewhere were built close to cemeteries. This combination was chosen, on the one hand, for hygienic reasons. There were concerns that the dead – who were normally kept within the family – might transmit diseases and cause epidemics. Concerns that were justified, as the spread of ebola demonstrates. On the other hand, mortuaries had an important psychological function. They took away people’s fears of being buried alive. When someone died or was declared dead, the lifeless body was taken to the mortuary and stayed there for at least two days under observation. This time was considered long enough to identify signs of certain death. In Germany and other countries, it is still specified that 48 hours have to pass between death and burial. Coffins play an important role in coping with death When a body is put in the coffin, this is a key moment for relatives in the process of saying goodbye and letting go. The coffin proves to be both an emotional and physical frontier. Functionally speaking, the coffin is a container that is used to transport, store and bury a body. Etymologically speaking, the German word for coffin (“Sarg”) comes from the Greek word sarkophagos , which means “flesh-eating”. From the practical point of view, coffins are not required to satisfy any really exacting demands: coffins are used for burial in a cemetery and for cremation in a crematorium. They need to be big enough to hold a body, sturdy and stable enough to withstand handling, i.e. primarily storage and transport of the dead person, simple to produce and, if at all possible, not too heavy to carry comforably. If cremation is planned, combustibility is another essential criterion. Wood, which has always been an important building material, was available in sufficient amounts in Europe, where it was also affordable. There were in addition enough experts in the wood-processing field; to this day, there are plenty of carpenters in rural areas who run burial companies on the side. A lucrative business, because – after all – people are always dying. Hard times for undertakers and relatives Times change and so do people. Everyone still dies eventually, but perhaps not quite as soon as in the past. Healthy lifestyles and medical progress have helped to reduce mortality rates or keep them consistent. General economic conditions have changed in the course of time too. In Germany, for example, death benefits have been eliminated and the prices of wood have risen, while the costs of all the other aspects of a burial have increased too. Cheap imported coffins are very popular and many people already decide while they are still alive whether they want to leave with a bang or a whimper. Anyone who does not find it difficult to choose a coffin while still alive removes a heavy burden from his or her relatives. The choice of an adequate but inexpensive model is often considered to be a reflection of the appreciation that the surviving family members have for the person who has died. Greater individuality and sustainability in coffin design Functionally, the coffin is a container which is used to transport, the laying out and the burial of a corpse . But , the coffin must be made ​​of wood? Trend with future coffins made ​​of bioplastics. (Source: Onora) Marieke Havermans’ mother-in-law had died and a coffin now had to be chosen for her. Havermans felt that the coffins available lacked class and individuality. They were very similar and more or less all of them were “dark, ugly and much too expensive” as Havermans remembers. In addition to this, many of the coffins were not even made of genuine wood any more; they were made of chipboard instead, a cheap building material that emits formaldehyde. Marieke Havermans is convinced that it is not dignified for any human being to end up surrounded by chipboard. Marieke Havermans was certain that there could be better coffin solutions. Ones that were of high quality and at the same time sustainable, biologically harmless and compostable. Coffins that do not pollute the environment, are attractively designed and are available at affordable prices. Although making coffins from biologically degradable plastic is not a new idea, there is a lack of specific products. This is what Marieke Havermans found out when she did her research. After considering all the data and facts, the Dutch woman came to the conclusion that the funeral market was ready for a change. She quit her job and obtained funding to set up the company Onora in ‘s-Hertogenbosch in the Netherlands in 2013. The aim of the company was to develop and market coffins made from biologically degradable bioplastic. From the theoretical idea to practical implementation Made the Onora coffins were injection molded. The necessary massive injection molds for the casket shell and the coffin lid were developed in Germany and manufactured in China. (Source: Onora) The objective was to produce a thoroughly environmentally sound coffin from organic materials that disintegrates naturally within ten years leaving no residue. It too quite some development skills and perseverance to reach this objective. As 2015 ended, Onora finally started series production. The Dutch company uses a special fibre-reinforced composite material based on polylactic acid (PLA) and hemp fibres to produce its biocompatible coffins. According to Marieke Havermans, it was a challenge to determine and test the material that was suitable for the project and it required plenty of time-consuming research. Due to its molecular structure, PLA is biologically degradable, although specific environmental conditions are necessary for this purpose – of the kind that exist in industrial composting plants. An appropriate blend of PLA and bio-based additives had to be created so that PLA is degraded biologically under “cemetery conditions”. Marieke Havermans succeeded in doing this, however. The Onora coffins are produced by the injection moulding process. The huge injection moulds required for the casket and lid were developed in Germany and manufactured in China. The coffin, a thin-walled container provided with reinforcement ribs and stiffening elements, weighs about 25 kilograms, which is half as much as an equivalent coffin made of wood, and can hold a body with a weight of up to 150 kg. Injection moulding process offers more options The costs of a conventional wooden coffin are made up not only of the wooden casket and the lid but also of the components needed for transport purposes, closure mechanisms and decorative elements. Since the company’s coffin is manufactured by the injection moulding process, handles, connection elements or other features can be integrated in a single operation. Screws or adhesives are not needed, so that costs are saved. Using a composite plastic material also provides creative scope in coffin design. Marieke Havermans has given her coffin a “soft” design, with rounded corners and an organic shape that is more reminiscent of a cocoon than a coffin. The coffins are supplied with a mattress, pillow and cover made from organic fabric, hemp or hemp fibres and organically grown cotton as well as wool that has been obtained in the Netherlands in an environmentally responsible way.” In the foreseeable future, Onora intends to produce a variety of coffin models made from bioplastic and market them throughout Europe. At the current time, the company’s development department is working on further interesting design elements. In addition to standard coffins, the company reports that it will also be supplying models in future in different colours as well as with further individualisation options. The product range is, in addition, to be expanded to include urns. Promising prospects of market success Marieke Havermans is satisfied with the result. Foreseeable wants Onora different coffin Models of bioplastic manufacture and market throughout Europe. (Source: Onora) Marieke Havermans is satisfied with what has been achieved so far. And she is certain that her organic coffins will establish them on the market successfully. Business is starting in the Netherlands and Belgium. Marieke Havermans is convinced that the time is ripe for a pioneering new coffin. Here is what the company itself has to say on its website http://onora.eu/de: “Onora produces ecological coffins. We are the only company in the market that produces 100 percent sustainable coffins. Our coffins are fully biodegradable. Our philosophy is “from Cradle to Grave” and our coffins do not pollute the soil or the air (after a cremation). In addition, the environmental impact is much smaller than that of a standard coffin and even smaller than that of other ecological coffins. The coffins are produced ​​in the Netherlands and made from organic waste, so we use less and better material for the production of our coffins.“ Excellent achievement Marieke Havermans is receiving strong confirmation: the coveted “Wood and Natural Fibre Composite Award 2015” was presented at the world’s biggest international “Sixth WPC & NPC Conference” organised by nova-Institut GmbH in Cologne / Germany. This innovation prize was awarded for new materials and products from the wood-polymer composites (WPC) and natural fibre composites (NFC) industry that were launched or were about to be launched on the market in 2015. The over 220 conference participants chose the three winners from six nominees. Marieke Havermans’ company Onora took first place with its 100 per cent bio-based coffin made by injection moulding technology and involving hemp fibre reinforcement. The press release published by nova-Institut GmbH says: “The participants chose the 100% bio-based coffin that is reinforced with natural fibres to be the easy winner. The product is injection moulded, which creates great scope for design variability where both shape and colour are concerned. The bio-based composition of the coffin makes it biologically degradable and is an example of the new large-volume applications for organic composite materials. The life cycle analysis reveals a CO 2 footprint that is low by comparison not only with conventional coffins but also with other organic coffins.” For the sake of completeness, here is some information about the products that came in second and third: second place was taken by Millvision BV, which is also a Dutch company. It won the prize for a flower pot made from a biologically degradable organic composite material incorporating residual agricultural fibres: “The nominated flower pots are produced at competitive prices from residual agricultural fibres from paprika and tomato farming and bio-based plastic. They are used in nurseries and are biologically degraded within a few months, even when the ground is cold. The innovative new flower pot acts as a fertiliser – thus promoting plant growth – and avoids the plastic waste produced with oil-based flower pots as well as the work involved as a result.” Third place was taken by the Finnish companies Aqvacomp Oy and Flaxwood Oy, which manufacture musical instruments from polystyrene reinforced with cellulose fibres: according to the official statement, “these new materials have the potential to substitute the use of rare and endangered wood species. Formulations with appropriate property profiles have been developed for various instruments, for example a cellulose fibre composite material, which can replace grenadilla wood in clarinets. The components have excellent heat and moisture resistance properties, so that the typical problems encountered when tuning wooden instruments are reduced.” More information about the winners and the other nominated candidates, the innovation prize and the WPC & NFC Conference in Cologne can be found at http://wpc-conference.com Guido Deußing

    Learn more
  • More sustainable cosmetics for a clean environment

    Topic of the Month: November 2015 Part two of our series of articles about sustainability takes a look at the use of microparticles in cosmetics and personal products. The particles used frequently involve plastics, which, however, represent a problem for the environment – as we are in the meantime aware. Scientists have started to search for an adequate replacement and have evidently succeeded in finding one. There is plenty of evidence to prove it: the microplastic particles used in cosmetics and personal products are a problem [1-6]. Microplastics enter the environment primarily via waste water, reaching inland waterways and, finally, the world’s oceans, without even rudimentary attempts being made to filter them out or eliminate them completely in sewage plants. Microplastics a problem Organisms that live in water confuse microplastics with food or ingest them when they eat. It is problematic that microplastics contain additives that are harmful to health and can incorporate pesticide residue or other pollutants from the environment. Inflamed tissue has been found in shellfish that have ingested microplastics. The health of human beings is threatened by microplastics too, when they are eaten with food, e.g. in the form of contaminated seafood. Cellulose particles from beech wood are to be incorporated in different care products ... © Fraunhofer IWM Searching for an alternative Research scientists at the Fraunhofer Institute for Mechanics of Materials (IWM) in Halle, Germany, have set themselves the goal of making major contributions to the development of measures that stop this. In the context of their work, they are looking for solutions to replace polymer-based microparticles of the kind used in cosmetics and personal products. Microplastic particles are used in toothpaste or exfoliation products as stabilisers or abrasives: their purpose is to remove unsightly plaque in toothpaste and dead skin in exfoliation treatment. Depending on the application, microplastics account for up to 90 per cent of the product. Discussion and enforcement of a ban on microplastics Due to their harmful effects on the environment, some US states have already prohibited the use of microplastics in cosmetics and personal products, while consideration is being given to a ban in the European Union (EU). This is the context in which IWM is carrying out its mission, which has focussed on research into potentially viable substitutes that have comparable product properties but have no adverse effects on the environment and are, ideally, degraded under natural conditions without leaving any traces or residue. ... and then assessed in the laboratory for their abrasive or cleaning effect. © Fraunhofer IWM Cellulose is a possible substitute This is where the “KosLigCel” project begins, which is being co-ordinated by the Fraunhofer Institute for Mechanics of Materials (IWM) in Halle. “Polyethylene is generally used for microplastic particles in cosmetic products at the present time. We, on the other hand, want to use particles from a natural product, i.e. cellulose that is made from beech wood scraps and is biologically degradable”, explains Project Manager Dr Vanessa Sternitzke from Fraunhofer IVM. If the project proves to be successful, it would be a valuable contribution to reduction of environmental pollution by microplastics. Project Manager Vanessa Sternitzke draws attention in this context to a study carried out by the United Nations (UN), according to which 4,300 tonnes of microplastic particles were used in personal products in 2012 in the EU alone, all of which are in the final analysis inevitably released and enter the environment in the course of their use. These 4,300 tonnes of plastic can be used in future for processes and products that make greater long-term sense. There needs to be a starting point for everything The current “KosLigCel” project, that is scheduled to take two years and is part of the cutting-edge “BioEconomy” cluster initiated by the German Ministry of Education and Research, includes the planned development of an exfoliation product and a toothpaste. CFF GmbH, a pulp processor from Gehren (Thuringia, Germany), which is providing cellulose and lignin particles for the project, and Skinomics GmbH from Halle, which is responsible mainly for dermatological testing of the new products, are partners in the project. The IWM reports that the particular challenge is to find or develop a substitute material that has the required property profile, i.e. corresponds in size, shape, hardness and surface structure to the microplastic particles that are to be substituted and at the same time has no adverse effect on skin. What is comparatively easy with synthetic polymer materials that can be customised to meet individual specifications and objectives proves to be a challenge when natural ingredients are being used. Focus on new approaches In their attempts to reach the goal they have set themselves, the IWM research scientists are working on modification of the beech wood cellulose and analysis of it down to the microstructure level. The use of cellulose from other sources, such as material left over from oat, wheat and corn production, is being investigated too. For the first time, the research scientists also want to test the use of modified sulphur-free organosolv lignin particles in cosmetic products. Isolated attempts have been made to replace microplastic particles in cosmetic products by such other materials as wax, salt or olive seeds. Substitutes of this kind have never been evaluated at the material science level up to now, however. The aim is to change this in the course of the KosLigCel project: “Tremendous scientific challenges still need to be overcome in order to find a substitute for polyethylene that works just as well but is biologically degradable in water – in contrast to polyethylene – and can be manufactured as inexpensively as possible”, says Dr Vanessa Sternitzke. The plan is to find out as precisely as possible what the decisive criteria for the required properties are. The Project Manager is convinced: “When we know this, we can evaluate reliably which materials are particularly suitable for replacing microplastic particles.” Better use of polymers, creation of added value Ideally, the use of cellulose could in addition open up further application areas. Because cellulose absorbs water and oil too, in contrast to polyethylene. This capability could, incidentally, help to improve the long-term effect of moisturising creams. The cellulose particles are a potential filling agent in aluminium-free deodorants too. The 4,300 tonnes of polymer material that have been channelled into the production of microplastics for cosmetics and personal products up to now will be used for more sustainable applications in the foreseeable future.

    Learn more
  • Sustainability is essential in future

    Topic of the Month: October 2015 Plastics made from vegetable oil The concept of sustainability not only requires responsible and economical use of limited resources; it also stimulates scientists and companies to apply their innovative skills in the substitution of fossil raw materials and feedstocks by renewable alternatives. A development that is being carried out in the USA reflects this trend. Scientists there are working on a new method for manufacturing polyurethane that is based on vegetable oil. Every industry has its own challenges. The challenges that the plastic and rubber industry faces include making efficient and sustainable use of energy and resources as well as focussing on the long-term consequences for human beings and the environment of using plastics. There are both environmental and economic reasons for doing this. Anyone who saves energy and raw materials not only protects the environment; he saves money into the bargain. Practical experience has demonstrated that sustainability is also a concept that stimulates creativity and the development of new manufacturing processes and methods, which enable companies to obtain a competitive edge. According to American scientists, Polyurethane can be produced from vegetable oil. © istockphoto / AngiPhotos First article in the “sustainability” series This “Topic of the Month” with the title “Plastics made from vegetable oil” marks the beginning of a series of articles that highlight the use of renewable raw materials, with particular emphasis on the production of polymer materials. We will, however, also be taking a look at cases where it appears to be sensible and far-sighted not to use plastics, e.g. in favour of renewable resources: plastic is simply too valuable to add it to a product with only a short useful life that will soon be thrown into the dustbin or end up littering the environment in an uncontrolled fashion. The process of rethinking this involves is producing results in many different areas and is leading to the adoption of a “back to the roots” approach, which means that preference is being given to renewable materials in certain cases – for the first time or, perhaps surprisingly, once again. Kessler and his colleagues are convinced that vegetable oils enable materials to be produced with greater flexibility, a wider range of stiffness properties and more varied design options. They report that vegetable oils are proving to be inexpensive, easily available and renewable. And, last but not least, it is apparently possible to make genetic modifications. Professor Michael Kessler. Source: Washington State University Move towards attractive alternatives One aspect that is important – because it is more sustainable and more sensible in the long term – is to opt for renewable resources in plastic production instead of oil or gas. Although there is nothing new about doing this, it is not common enough in the opinion of many champions of the use of biobased plastics. Crops – or rather the products made from them, which are in this case vegetable oils – form the area in which a group of scientists headed by Professor Michael Kessler , Director of the Mechanical and Materials Engineering Faculty at Washington State University in Washington, USA, is carrying out research. Kessler and his colleagues report that they have succeeded in making polyurethane (PU) in a completely new way from olive and linseed oil. Polyurethane is an extremely resistant, hard-wearing and corrosion-resistant plastic that is used in the production of foam plastics, car tyres, hoses and sealing materials. © istockphoto / ImageegamI New approach adopted in vegetable-based plastic production According to Professor Kessler, about 14 million tonnes of polyurethane were manufactured in 2010; Washington State University predicts that global production will be increasing to more than 18 million tonnes per year by 2016. Polyurethane is an extremely resistant, hard-wearing and corrosion-resistant plastic that is used in the production of foam plastics, car tyres, hoses and sealing materials. Most PU has been manufactured from mineral oil up to now. The idea of producing polyurethane on a vegetable basis is not by any means new. The research group headed by Michael Kessler has, however, entered virgin territory – as Kessler puts it – with its method and the use of vegetable oil: Kessler and his colleagues are convinced that vegetable oils enable materials to be produced with greater flexibility, a wider range of stiffness properties and more varied design options. They report that vegetable oils are proving to be inexpensive, easily available and renewable. And, last but not least, it is apparently possible to make genetic modifications.men. Polyurethanes are in the class of compounds called reaction polymers, which include epoxies, unsaturated polyesters, and phenolics. (Source: Wikipedia) Solvent-free production of biobased polyurethane The research scientists have produced polyurethane on the basis of olive, rapeseed, grapeseed, linseed and castor oil in the course of their study. While it is reported that mineral oil-based solvents have to be used in the conventional production of PU, the scientists from Washington State University have, it seems, succeeded in dispensing with solvents and catalysts entirely in their co-operation with colleagues from Iowa State and Cairo University . An outline of the fundamental part of PU production: two different chemical compounds are combined in a reaction in polyurethane production. One of them is a polyol. Polyols include organic compounds that contain several hydroxy groups (-OH); what is involved here is a functional group that has a major impact on the reactive character of the compounds. The number of hydroxy groups in a chemical compound is identified by the word ending: if a compound has one, two or three hydroxy groups, it is given the ending “-ol”, “-diol” or “-triol”; those with four or more hydroxy groups are generally referred to as polyols . Polyols of the kind required in the plastic industry can be manufactured petrochemically, i.e. on the basis of mineral oil, or oleochemically, in this case on the basis of vegetable oil. By the way: Oleochemistry is the study of vegetable oils and animal oils and fats, and oleochemicals derived from these fats and oils or from petrochemical feedstocks through physico-chemical modifications or transformation. First used in the making of soaps, oleochemistry is now part of our daily lives where it is found in a wide variety of sectors like food, cosmetics, pharmaceutical and industrial. Professor Michael Kessler (l.) an a member of his team in the laboratory. Source: Washington State University The ingredients are crucial, not their origin The plastic is given its property profile in the course of polymerisation. The individual polyols are combined to form a three-dimensional network in this process. How complex this network is and what characteristics the subsequent plastic has depend to a decisive extent on the reactive points in the molecule: some oils – linseed oil, for example – have five to six reactive points; the macromolecular structures produced tend to be on the stiff side; other oils – olive oil, for instance – in turn have fewer reactive points, which leads to a lower degree of cross-linking after polymerisation, although this makes the material more flexible. Professor Kessler explains that the special feature of the procedure they chose is the way the polyols are manufactured, without going into the chemical details. The scientist does, however, reveal that the production process can be compared to the Lego construction principle: “The compounds in this chemical group are simply connected together and produce new compounds”. The scientists describe the way Kessler and his colleagues produce polyurethane as a new kind of chemistry that is based on a combination of castor fatty acids and modified vegetable oils. Interest in technology transfer: research scientists are looking for users As the Director of the Center for Bioplastics and Biocomposites , which co-ordinates the joint research activities of Washington State University and Iowa State University with the industrial community in the development of biobased plastics, Professor Kessler is hoping that their new method will attract the interest of the plastic industry. The close attention that the project is being given indicates that it appears to be considered very impressive: it was launched in early 2015 with financial support from the National Science Foundation, the US governmental authority for the funding of research and education, as well as from partners in the scientific and industrial communities. A total of 24 companies have joined in the research project. n. Guido Deußing Source Biobased Polyurethanes Prepared from Different Vegetable Oils, Chaoqun Zhang, Samy A. Madbouly, and Michael R. Kessler, ACS Appl. Mater. Interfaces, 2015, 7 (2), pp 1226–1233, Publication Date (Web): December 26, 2014 (Research Article), DOI: 10.1021/am5071333

    Learn more
  • Synthetic Batteries for the Energy Revolution

    Sun and wind are important sources of renewable energy, but they suffer from natural fluctuations: In stormy weather or bright sunshine electricity produced exceeds demand, whereas clouds or a lull in the wind inevitably cause a power shortage. For continuity in electricity supply and stable power grids, energy storage devices will become essential. So-called redox-flow batteries are the most promising technology to solve this problem. However, they still have one crucial disadvantage: They require expensive materials and aggressive acids. Picture: The research team of Jena University (from left to right): Prof. Dr. Ulrich S. Schubert, Tobias Janoschka, Dr. Martin Hager. Source: Anne Günther/FSU A team of researchers at the Friedrich Schiller University Jena (FSU Jena), in the Center for Energy and Environmental Chemistry (CEEC Jena) and the JenaBatteries GmbH (a spin-off of the University Jena), made a decisive step towards a redox-flow battery which is simple to handle, safe and economical at the same time: They developed a system on the basis of organic polymers and a harmless saline solution. “What's new and innovative about our battery is that it can be produced at much less cost, while nearly reaching the capacity of traditional metal and acid containing systems,“ Dr. Martin Hager says. The scientists present their battery technology in the current edition of the renowned scientific journal 'Nature' (DOI:10.1038/nature15746). In contrast to conventional batteries, the electrodes of a redox-flow battery are not made of solid materials (e.g., metals or metal salts) but they come in a dissolved form: The electrolyte solutions are stored in two tanks, which form the positive and negative terminal of the battery. With the help of pumps the polymer solutions are transferred to an electrochemical cell, in which the polymers are electrochemically reduced or oxidized, thereby charging or discharging the battery. To prevent the electrolytes from intermixing, the cell is divided into two compartments by a membrane. “In these systems the amount of energy stored as well as the power rating can be individually adjusted. Moreover, hardly any self-discharge occurs,“ Martin Hager explains. Traditional redox-flow systems mostly use the heavy metal vanadium, dissolved in sulphuric acid as electrolyte. “This is not only extremely expensive, but the solution is highly corrosive, so that a specific membrane has to be used and the life-span of the battery is limited,” Hager points out. In the redox-flow battery of the Jena scientists, on the other hand, novel synthetic materials are used: In their core structure they resemble Plexiglas and Styrofoam (polystyrene), but functional groups have been added enabling the material to accept or donate electrons. No aggressive acids are necessary anymore; the polymers rather 'swim' in an aqueous solution. “Thus we are able to use a simple and low-cost cellulose membrane and avoid poisonous and expensive materials”, Tobias Janoschka, first author of the new study, explains. „This polymer-based redox-flow battery is ideally suited as energy storage for large wind farms and photovoltaic power stations,” Prof. Dr. Ulrich S. Schubert says. He is chair for Organic and Macromolecular Chemistry at the FSU Jena and director of the CEEC Jena, a unique energy research center run in collaboration with the Fraunhofer Institute for Ceramic Technologies and Systems Hermsdorf/Dresden (IKTS). In first tests the redox-flow battery from Jena could withstand up to 10.000 charging cycles without losing a crucial amount of capacity. The energy density of the system presented in the study is ten watt-hours per liter. Yet, the scientists are already working on larger, more efficient systems. In addition to the fundamental research at the University, the chemists develop their system, within the framework of the start-up company JenaBatteries GmbH, towards marketable products. Literature Janoschka T et al. An aqueous, polymer-based redox-flow battery using non-corrosive, safe, and low-cost materials. Nature, DOI:10.1038/nature15746

    Learn more
  • The world of tomorrow will be catching some rays

    Topis of the Month: September 2015 The global demand for electricity, raw materials for the chemical and plastics industry as well as aviation fuel could be met by solar energy. – Is the possible? At least Michael Carus, managing director of the Nova-Institut GmbH in Hürth near Cologne, convinced. The company specializes in the marketing of sustainability. On 29 and 30 September 2015, leading experts from politics, research and the industry will meet at the Haus der Technik in Essen, Germany, at the biggest European “Conference on Carbon Dioxide as Feedstock for Fuels, Chemistry and Polymers” to discuss latest technologies and strategies for a fast implementation. Expected are 200 participants from all over the world, including many global companies. The amount of solar energy impinging on earth’s land surfaces is sufficient to meet the global energy demand even by 2050, if only less than 1% of worldwide land area will be covered by photovoltaic (PV) systems. In addition to the direct use of solar energy, other renewables such as wind or water, can contribute to fulfilling energy demands. This global view shows that providing humankind with sustainable and environmentally friendly energy is not a problem in principle, even in the long term. Furthermore, the efficiency of PV systems has been constantly growing: Whereas today, ordinary solar cells convert around 15% of the solar energy they receive into electricity, scientists expect a rise in efficiency of up to 40% by 2050. But is the conversion of power supply to renewable energy economically feasible? New solar parks and wind farms at favourable locations already have electricity production costs of 0.06-0.07 €/kWh and are therefore often less expensive than fossil or nuclear energy systems. However, there are two disadvantages inherent to the system that slow down the expansion of solar and wind energy: the main costs arise during plant construction, while future operating costs are quite low. Also, a wide distribution of solar and wind energy requires massive extensions of power grids and storage systems. Both factors make huge investments necessary.Doch, ist der Umbau der Energieversorgung auf Erneuerbare Energien aber ökonomisch machbar? Michael Carus: „Neue Solar- und Windfarmen an günstigen Standorten kommen schon heute auf Stromgestehungskosten von 0,06-0,07 €/kWh und sind damit oft preiswerter als fossile oder nukleare Energiesysteme.“ Doch zwei systemimmanente Nachteile verlangsamten den Ausbau der Solar- und Windenergie, wie der Geschäftsführer meint. Demnach entfalle der Hauptteil der Kosten auf den Bau der Anlagen, die späteren Betriebskosten seien hingegen sehr niedrig. Dieser Sachverhalt erkläre die hohen Investitionskosten. Obendrein müssten zur weiträumigen Verteilung des Solar- und Windstroms die Stromnetze und Speichersysteme massiv ausgebaut werden; auch diese Maßnahme erfordere weitere Investitionen. Michael Carus, managing director of Nova Institut GmbH in Huerth near Cologne, Germany. Source: Nova-Institut GmbH What would be the cost to change humankind’s entire energy supply to solar energy? In 2014, more than 1,300 billion USD (=1,200 billion €) were spent on arms expenditure worldwide, of which almost half was spent by the USA. Solar cells are currently available for 100 €/kW peak performance – prices between 60 and 70 €/kW are expected for the nearer future. Using the annual military budget of 1,300 billion USD, more than 10,000 GWpeak per year in photovoltaic systems could be built. Compare this to an annual global power plant output of 5,550 GW (2012) with a current share of already 26% renewable energies. Even considering that this calculation is too simplistic, as considerable additional investments in grids and storage are necessary, it shows one thing: The global military budget of only a few years would be enough to switch the world’s electric power supplies to solar energy use! Technical developments of the last few years have shown that solar, wind and hydro power not only provide eco-friendly electricity, but can also be used to produce organic raw materials. Renewable energies are used to derive the elements hydrogen and oxygen from water. Combining the generated hydrogen with CO2 forms methane, methanol and a variety of other chemical building blocks. This process can be achieved catalytically or biotechnologically. More than 20 pilot plants worldwide are operational already and the first commercial plants are under construction. This technology is called Carbon Capture and Utilization (CCU) or power-to-gas and power-to-liquid. Calculations show that, using this technologies, it is possible to sustainably supply the chemical and plastics industry with organic raw materials. Even with a strong growth, the carbon demand of the chemical and plastics industry could easily be met through CCU technologies in 2050: About 2% of the world’s desert area would be enough to cover the global carbon demand of the chemical and plastics industry with solar and CCU technologies even in 2050. Already now, solar-powered CCU technologies can contribute toward climate protection. One of the biggest climate challenges are the growing CO2 emissions caused by air traffic. Airlines and aircraft manufacturers are investing large amounts to produce climate friendly bio-kerosene from wood, algae, Jatropha and biogenic waste. However, high costs as well as insecurities about land requirements, biodiversity and potential conflicts with food and feed have so far prevented industrial implementation. Synthetic aviation fuel based on solar, wind and water energy as well as CO2 offer an alternative and it is already being produced on small scales. More than ten pilot plants are using electrolysis and Fischer-Tropsch-Synthesis to produce different fuels with efficiency levels of 70 to 80%. Solar kerosene can replace petrochemical kerosene 1:1 and actually has better combustion characteristics due to its purity. Production costs depend primarily on prices for renewable energies and are about the same as for bio-kerosene. First life cycle assessments show that the climate footprint of solar kerosene is much better than all alternatives. The CO2 emissions per tonne solar kerosene are considerably lower than those of bio-based kerosene and about 80 to 90% lower than of petrochemical kerosene. Calculations show that compliance with the 2-degree-Celsius climate goal is only possible using solar kerosene. In comparison to bio-kerosene, area and water demands are also much lower. These technologies, described here in brief only, mean nothing less than a sustainability revolution for all energy and raw material supply. On 29 and 30 September 2015, leading experts from politics, research and the industry will meet at the Haus der Technik in Essen, Germany, at the biggest European “Conference on Carbon Dioxide as Feedstock for Fuels, Chemistry and Polymers” to discuss latest technologies and strategies for a fast implementation. Expected are 200 participants from all over the world, including many global companies. Agenda

    Learn more